Please select what extras you would like with the fan from the
drop down menu above
Specification:
Air Extraction m3/hr : 85m3/hr (20Pa MAX)
Air Extraction L/s : 23 L/s
Noise : 41dB(A)
Watts : 14W
Manrose XF100 Extractor Fan Range Overview
The Manrose range of 100mm (4") Bathroom/ Toilet Fans
incorporates the latest technology and design and offers the most comprehensive
range with the widest choice of options and variations.
Attractively styled in high gloss ABS thermoplastics for
modern appearance and ease of cleaning, designed for easy installation and can
be wall, ceiling or window mounted (Please Note Pullcord Model can not be
ceiling mounted).
There are several options available; Standard model for remote
switching, integral Pullcord units, and Timer models which incorporate an
electronic time delay switch. Humidistat Control models are also available
which are designed to switch on the fan as the humidity rises in the bathroom
and off as it drops. The Passive Infra-Red model is sensitive to movement and
will switch on the fan when someone enters a room and switch it off when the
room is vacated.
Construction
These fans are moulded in impact resistant high gloss ABS
thermoplastics for strength, durability and finish.
Electrical
220-240V ~ A.C. 50Hz Single phase consuming 20 watts. These
fans are double insulated and do not require an earth. All wiring must comply
with current IEE regulations. A double pole isolating switch, having a contact
separation of at least 3mm in all poles, must be used with a 3 amp fuse fitted.
The fan must not be accessible to a person using either the shower or bath and
mounted a minimum of 1.8 metres from the floor.
Motor
Single phase induction motor with pre-oiled bearings fitted for a long maintenance free life and protected by a thermal fuse.