A stalk/steering wheel control adaptor enables you to utilise the original factory remote audio (whether built onto steering wheel or fitted on a stalk next to the steering wheel) with an aftermarket unit.  

Compatibility:

Car Make / Model	Year	Radio
Renault Clio	2005 - 2009	(III, R)
Renault Kangoo	2008 - 2019	(II, W)
Renault Laguna	2005 - 2009	(II) III, G)
Renault Master	2010 - 2014	(III)
Renault Megane	2005 - 2008	(II)
Renault Modus	2004 - 2012
Renault Scenic	2005 - 2009	(JM/JZ)
Renault Trafic	2006 - 2010	(II)
Renault Twingo	2007 - 2009	(II)

Headunit: VDO Update List
Connection: 8 Way ISO

Vehicles with dash display

Note: Your vehicle should have a Update List stereo and a separate display, then this is the correct lead.

If you have a Tuner List stereo and a separate display then you require the DS-RN003
If you have a Tuner List / Update List stereo with display built into stereo then you require the  DS-RN004

NOTE: PLEASE TAKE NOTE OF YELLOW PLUG AS IT HAS 6 POSITIONS WITH ONE EMPTY SPACE IN THE MIDDLE SO ONLY 5 POSITIONS USED. IF YOU HAVE THIS LAYOUT THEN THIS WILL BE CORRECT FOR YOU.

PATCH LEAD This interface connects a compatible car stereo with a joystick input (blue  line-in mini-jack) or wire input on the back of the unit to the existing stalk/steering wheel controls of the vehicle.

CTMULTILEAD.2 Universal head unit connection lead is suitable for:

• Alpine (3.5mm jack)
• Beat (single wire connection)
• Chinese / Xtrons / 3 wire unbranded units (3 wire connection)
• Clarion (3.5mm jack)
• Grundig
• JVC (3.5mm or single wire)
• Kenwood (single wire)
• LG (3.5mm jack)
• Nakamichi (single wire connection)
• Panasonic  (single wire but NOT AV units)
• Philips (single wire connection)
• Pioneer (3.5mm jack)
• Sony (3.5mm jack)
• Zenec  (single wire)
• Other Chinese SWC learning head units

Notes:

• You can simply cut the loops / wires to select which brand you are fitting.
• Supplied with instruction sheet

PLEASE NOTE : If you have a dashboard mounted audio display then this will not work once the new stereo is fitted but your clock and temperature will remain. 

Please note: This patch lead CANNOT be used for Blaupunkt / Parrot / Becker / JVC KW-AVX  head units / Older Kenwood units with the DIN plug. For those models you need to purchase the lead from our eBay Store. Click here for additional patch leads

TECHNICAL NOTE:

• CAR AUDIO FITTING ACCESSORIES ARE SOLD WITH LIMITED INSTRUCTIONS. 
• SOME KNOWLEDGE OF CAR AUDIO INSTALLATION IS HELPFUL IN CASE A MODIFICATION IN SOME RARE CASES MAY BE NECESSARY OR NEEDED.

IMPORTANT NOTE: Please make sure that is the correct Stalk Adaptor for your car by firstly  checking to see if your make, model and year of car is listed in the  advert. Secondly by checking to see if the connection in the picture  listed is the same as you have in your vehicle.

If the connection in the car is different from what you see in the picture then this adaptor is NOT suitable.