Upper and lower jaws of a very large male Rottie dog are cast in durable urethane resin. Jaw
measurements: width =3 1/4" or 8.5cm (as measured across the rear molar teeth at
the widest point), length =4 1/4" or 11cm (as measured from the incisors to the
last molar tooth). I have the jaw casts of several other domestic dogs and a wolf/dog hybrid available. Only the upper jaw (palate) measurements are given.
The mold was taken directly from a real skull, and is detailed down to
the pores and texture of the bone. It also includes a portion of the
jaw bone. Please note - the cast has been filled with
yellow urethane foam for added stability; this can easily be trimmed
and shaped as desired. It also readily accepts hot glue. These casts
are also paintable - however you will need to lightly scuff the surface
with a steel wool or scouring pad in order to get good paint adhesion.
I got good results with scuffing, wiping with denatured alcohol and
then priming with the spray can automotive-type primer available in
stores. Then it can be painted with virtually any type of paint.