Diamond Hole Saws Choice of sizes from 6mm to 45mm
Diamond dust hole saws are suitable for drilling ceramic tiles, glass, marble, slate and porcelain tiles up to hardness grade 5
For use with conventional power drills on the lower speed settings with the hammer action disabled.
Diamond Hole Saws – Instructions for Guidance only
Cooling and Lubrication
When cutting hard materials it is important to ensure the cutter is kept cool to avoid damage to the material being drilled and premature wear of the cutter.
Using water as a coolant/lubricant will substantially extend the life of these hole saws.
If you're drilling on a vertical surface try a hand spray water bottle, or sponge soaked in water and held underneath, but in contact with the drill bit. Keep the bit as wet as possible during operation, if the bit dries out during use it will overheat and immediately blunt.
The full set of 16 bits includes one of each size from 6mm through to 45mm and includes first class signed for delivery to the UK mainland.
How to use your Holesaw
In an ideal world your piece of work should be clamped firmly to a bench to allow for slow controlled drilling. Of course sometimes that's just not possible, so if you're drilling in situ or at an awkward angle try the following:-
Make a template from a piece of timber or waste material, locate this over the area where you want to drill your hole and use it as a "guide" to start the hole. Once you've got into the surface by 1mm to 2mm you can remove the guide and continue to drill in a controlled manner.
Need to drill a hole without Water?
Click the following link to see our range of Vacuum Brazed Drills.
European Orders
For orders outside the UK, the postal costs vary by weight of item and increase once the item weighs over 100g in increments of 50g.
Due to the way eBay works, we need to place a single postage costs for every item in this listing, so we price for the heaviest bit (45mm).
We suggest once you place your order, you use the option to request an invoice from us. We will then weigh your order and adjust the postage accordingly (usually making it a little cheaper). That way you won't get overcharged for delivery.
Feel free to request charges before you order as it's easy for us to weigh a few items and give a very accurate cost.
Why Shop with Us?
We are a fully VAT Registered UK Limited Company
A full VAT invoice will be included with every sale.
We offer a full returns policy if you are unhappy with the delivered product.