Tested on a mini with our lights !
This is a new Flasher / Blinker / Indicator relay that replaces the
standard unit when you change to LED units. It corrects flashing too
fast and without the need to use a Load resistor for each bulb. This Flasher is modified to our own design to incorporate a 90dB buzzer.
Technical:
We tested seven different flasher units from various manufactures before deciding on this unit.
This one worked when we tested it in the freezer, in the oven and on the car ! The others failed :-(
You may need two units, one for the flasher unit and one for the hazards..
This unit fits most British classic vehicles such as Austin Morris / Rover
The pinout is visible on the side of the unit
It is a different pinout to the CF13 JL-02
Attempting to fit this flasher to a vehicle that requires a CF13 JL-02 may damage it
Refunds will not be made for damaged units.
Note : if your car has OBC. If you have an OBC you may get an error message or bulb out light, when replacing your standard bulbs with LED’s. As LED’s only use a fraction of the power compared to standard filament bulbs.
To bypass the OBC and eliminate bulb flashing, error messages and bulb out lights you will need to install resistors. These are available from our shop, we also offer No Error LED’s with built in resistors.