WE BUY DIRECT FROM THE MANUFRACTURERS

NO MIDDLE MEN SO WE CAN PASS THE SAVING ON TO OUR CUSTOMERS

All our products are CE / ISO9001:2000 / ROHS / accredited

And manufactured by a member of the Water Quality Association

ALL OUR PRODUCTS ARE UK STOCK

Please take a look at our ebay shop

Where you will find

A range of quality water purification products and accessories

At unbeatable prices

4 STAGE WITH DI STAGE PORTABLE REVERSE OSMOSIS WATER FILTRATION SYSTEM

CHOOSE FROM

50GPD DAY TFC REVERSE OSMOSIS MEMBRANE SYSTEM

100GPD DAY TFC REVERSE OSMOSIS MEMBRANE SYSTEM

150GPD DAY TFC REVERSE OSMOSIS MEMBRANE SYSTEM

SUPPLIED WITH EASY FIT PUSHFIT FITTINGS


**UNLIKE SOME CHEAPER SYSTEMS OFFERD FOR SALE

OUR SYSTEM IS FITTED WITH A MAUNUEL FLUSHING SYSTEM

THIS IS TO FLUSH THE MEMBRANE TO PROLONG THE MEMBRANES LIFE

ALL QUALITY R/O SYSTEMS ARE FITTED WITH A FLUSHING SYSTEM

PLEASE COMPARE**


SUPPLIED WITH 6 MTR POLY TUBE / 

GARDEN HOSEPIPE - WASHING MACHINE CONNECTOR / WALL MOUNTING BRACKETS

STAGE 1 5 MICRON SEDIMENT FILTER

with a 5 micron rating it is effective in removing dirt,rust and sand particles

this will catch all the large particals to protect the later filter and membrane

STAGE 2 GRANULAR ACTIVATED CARBON FILTER

reduction of chlorine,MtBE,trihalomethanes,pesticides,herbicides,benzine,radon

and countless volatile organic chemicals

to provide enhanced reduction of odour and colour

STAGE 3 TFC REVERSE OSMOSIS MEMBRANE

A thin film composite (TFC) high quality membrane. It removes the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium. The water is forced through this membrane and any un-pure water is discarded allowing through just pure filtered water

STAGE 4 DI CARTRIDGE

Tulsion 115 Mixed bed resin allows for total de-ionisation (polishing the water) of your reverse osmosis water enabling you to achieve a Total Dissolved Solids (TDS) of zero ppm.

The TDS from a RO unit is not always as low as required so using DI resin will bring the TDS down to almost zero.

DI Resin should be changed once your TDS reading goes above zero ppm

please note

The input water must meet the following criteria for proper Reverse Osmosis function:

  • Temperature must be less than 45 degrees Celsius
  • Iron content no more than 0.1 ppm
  • Water pressure must me a minimum of 40 psi (2.75 Bar) To achieve maximum water production you would require the optimum 80 psi of water pressure
  • PH not less than 3 and not more than 11
  • TDS under 1000 ppm recommended





All our products carry a 12 month parts and labour warranty excluding filters

POSTAGE TO UK MAINLAND ONLY PLEASE CONTACT US FOR SHIPMENTS TO OFFSHORE LOCATIONS OR REMOTE AREAS OF SCOTLAND AS ADDTIONAL CHARGES MAY APPLY