TRADITIONAL HEART 'Palm Punch' or Hole Punch

Now only available in 3/8" (10mm) size is approximate

The sizes given are for the punched out image

The punches can be held and viewed from underneath for accurate positioning of the cut

We recommend from a minimum of 80gsm, up to a maximum of 300gsm card

They will NOT accommodate 2mm funky foam or thin felt as the slot is too narrow, but on the plus side they're more robust than the earlier Xcut punches and take less effort to use

Combine with other items for postal savings.

The punched image starts between 6mm to 8mm from the edge of the page
They all punch the correct way up when punched from the bottom of the page.


Despite the manufacturers advice of using a minimum of 90gsm paper, for the more intricate designs we recommend a minimum paper weight of 120gsm and a maximum of 260gsm, or with the simple designs such as circles, hearts, stars and squares, etc. you can use a maximum of 300gsm.
Subject to the individual characteristics of each design, using less than 120gsm is likely to jam the punch, or result in an incomplete cut, so if you do need to cut thin paper, such as 80gsm or similar, or even tissue or crepe paper, then it can be achieved by making the thin paper the content of a sandwich of 3 sheets, with an 80gsm sheet either side of it.
This will total around 180gsm and that will cut cleanly, even with (subject to the intricacy) up to 6 sheets of tissue in the sandwich making a total of just under 300gsm, subject to the quality (weight) of the tissue paper.

Feedback

Our feedback is automated to respond to feedback received, so every time we receive a positive feedback you will receive an immediate positive feedback to add to your score. If no feedback is received, none will be given. If you feel that you wish to leave a negative or neutral feedback, please contact us first as we can usually resolve any issues to your satisfaction. There is no automated feedback to non positive feedback.