Pair of Chevron design Heavy Duty side Hung Garage Doors.

Winder Joinery employ Guild of Master Craftsman accredited joiners with over 50 years experience. We take great pride in building each product by hand; delivering outstanding build quality and beauty down to the last detail.


  • The framing of the doors finishes 46.5mm x 95mm  and is made from joinery grade, sustainably sourced FSC Scandinavian Redwood Pine Softwood.
  • All Doors are glued using Waterproof wood glue.
  • The Doors are framed, ledged and braced and the bracing finishes 28mm x 95mm.
  • Our frame joints employ “ Through mortise and tenon joints” which are glued and wedged for extra strength and durability.
  • Clad with heavy duty custom made 18mm x 112mm finish T&G match boarding for extra strength and durability
  •  Superior weather protection system offered in multiple colours
  •  The doors are rebated on the meeting jambs, please state which door that you would like to open first (Assuming that the doors will be opening outwards and that you are looking from the front)
  • If you would like a frame to go with the doors then you can purchase one by following this link: https://www.ebay.co.uk/itm/264313574792
  •  Custom sizes available by request

If you would prefer the boarding to be inverted and meet in the middle angled the other way then please visit our other listing for the type 2 chevron garage doors http://www.ebay.co.uk/itm/Type-2-Wooden-Chevron-Side-hung-Timber-Pair-of-Heavy-Duty-Garage-Doors-Softwood-/251863631676?ssPageName=STRK:MESE:IT


We also accept payment through all major credit and debit cards except American Express.


Please make sure you state the correct width and height dimensions. (We cannot accept returns if the wrong size is ordered as the gates are made to order)


The Garage Doors are made by Winder Joinery, we are a reliable, well establised family run business with over 40 years experience, we pride ourselves on top quality workmanship and so each pair of doors are made to the highest standard guaranteed.

We insist on quality and durability...

All doors / gates are made using ex 9”x 2” (230mm x 51mm) rough sawn 'unsorted' Scandinavian redwood which is the best available. We cut it to 105mm width then plane square edge it to between 46mm and 48mm thickness, dependent the on supply from the timber imported and finishes a full 95mm width.

In general, industry match boarding is sometimes quoted as “125mm x 19mm” which can be misleading as this is the size the boarding starts as in rough sawn form. In reality, the finished planed size of this match boarding in 118mm x 15.5mm.

We do things a little different. The match boarding we use is manufactured for us (or sometimes by us) from 5”x1” (125mm x 25.4mm) rough sawn 'unsorted' Scandinavian redwood which is the best available and the finish of the boarding is a full 118mm x 18mm thickness. In short, our match boarding is much stronger and stable. We feel the need to explain this as we have to cover the extra cost for the quality we provide.