Net Optics intelligent GigaBit Fiber Bypass (iBypass) Switch with Heartbeat introduces the industries first remotely accessible in-line security access device. IT security professionals can now monitor and configure traffic parameters being sent to their IPS devices, ensuring more efficient data capture. Bi-directional traffic utilization and peak indicators can now be viewed on-line or via front panel display to help identify possible network or application anomalies before there is a major outage. With available Net Optics management software, a comprehensive view of all intelligent devices and their operating status are accessible - See more at: http://www.netoptics.com/products/gigabit/gigabit-fiber-ibypass-switch-heartbeat-and-sfp-monitor-ports#sthash.2A0GLKpt.dpuf

Cable Interface: Copper Cable Type: 22-24 AWG unshielded twisted pair cable, CAT5/CAT5E Link Distance Supported: 220 meters

 Optical Interface: Corning Multimode 62.5/125µm, wavelength, 850nm Insertion Loss: Network Port: < 1.25 dB max Insertion Loss: Monitor Port: < 1.25 dB max 

Corning Singlemode 8.5/125µm, wavelength, 1310nm Insertion Loss: Network Port: < 1.25 dB max Insertion Loss: Monitor Port: < 1.25 dB max

 Operating Specifications:

Operating Temperature: 0ºC to 40ºC Storage Temperature: -10ºC to 70ºC Relative Humidity: 10% min, 95% max, non-condensing 

Input Power: 100-240V, 0.5A ~ 47-63Hz Output Power: 12V 3A

Mechanical Specifications: Dimensions: 1.3125" high x 11" deep x 8.75" wide

 Connectors:

(2) Duplex SFP LC connectors (monitoring ports) 

(2) Duplex LC connectors (network ports)

 Modes: 

Bypass OFF: Normal operation; traffic flows through attached monitoring device 

Bypass ON: During power failure or if the monitoring device cannot pass traffic, the monitoring device is bypassed and traffic flows directly between the network ports; traffic is also mirrored to the monitor ports as if the iBypass Switch were a full-duplex breakout Tap Tap: The CLI command “set timeout 0” to force Bypass ON mode; the iBypass Switch operates as a full-duplex breakout Tap

Software: Command Line Interface: Any terminal emulation software 

Net Optics Web Manager: Any browser 

Net Optics System Manager: Windows 98, Windows 2000, Windows XP

Certifications: Fully RoHS compliant

Part Number: IBPO-HBSX-SFP