The cartridge with the shrink tube installed on a clip and shown in the gallery photo is for illustration only and is not included in this listing.

I find it best to slide the shrink tube over the wire and then solder the wire in the the cup just below the crimp area of the tube with as little solder as possible. Crimp the wire over the insulation on the wire and slide the shrink tube over the clip and heat shrink it onto the clip. Caution: Using too much solder wont allow you to slide the the tube over the clip. You can also shorten the clip if desired by breaking off the crimp portion leaving the cup, and repeating the above. See gallery photo.

I am offering from my smoke free home nine (9) cartridge clips, and 8 heat shrink sleeves. Enough for two cartridges with one extra clip. The clips are .587 inches or 1.490 cm long and the contact area of the clips are flashed gold over nickel and have a contact resistance of .01 ohms. All components are RoHS Compliant lead free materials.  

*Compression type clips will fit all modern round cartridge pins sizes: .050 inches / 1.27 mm nominal, and will also fit round cartridge pins from 

.0492  inches / 1.20 mm to 

.0531 inches / 1.35 mm

The eight (8) lengths of heat shrink tube, (two each of the following colors) Red, White, Blue, and Green, are approximately 13/16 inches or 2.06 cm long. After crimping I use a dab of solder to insure I have a good connection. If you have any questions, please contact me prior to your purchase. 

FEEDBACK: Our goal is to satisfy our customers and earn positive 5 star feedbacks for every item. If you are happy with your purchase, please take a minute to leave us a positive 5 star feedback. If you have any issues with your purchase, please contact us directly using eBay’s message service to resolve the issue so that we can earn your positive 5 star feedback. Thank You

Import duties, taxes, and customs charges are not included in the item price or shipping cost. These charges are the buyers responsibility. At your option please check with your country's customs office to determine what these additional costs will be prior to bidding or buying.