Brief Introduction:
- This is an easy-to-use demonstration PCB which is populated with a PIC24FJ256GB106 IC, a 2*16 LCD, 4 digits 8-segment LED display, an LM75A temperature sensor, an NTC-SMD thermistor, three tactile switches and a USB MiniB port. Connecting the demo board and PC with the USB cable provided, you can upgrade the firmware of the demo board’s mainboard via HID protocol and use this demo board to measure the temperature around the devices with the help of the on-board temperature sensor, the thermistor, and display the temperature through LCD and LED. You may also write commands to gain the time and historical temperature data stored in SPI Flash memory via Hyper Terminal.
Features:
- Size:84.40(L) × 70.70(W) × 45.10(H) ±0.2mm
- Two ways of reading the temperature around the current device:
- Temperature sensor LM75A
- Temperature Resistor
- USB supporting HID protocol for firmware upgrade of the mainboard
- USB supporting CDC protocol and simulating UART port
- 2*16 LCD used for displaying the information of function modules and temperature
4 digits 8-segment LED display used for displaying temperature
Three tactile switches used for switching the function modules
Green power-on indicator LED
SPI Flash stores temperature from LM75 temperature sensor and temperature resistor
Applications:
- Upgrade the firmware of the mainboard
- Temperature measuring around the board
- Read historic data by using commands
Package Included:
- PIC24 General Purpose Demo Board x 1
- USB B to mini B cable ×1
Note:
- We provide complete project codes and assorted Hex files for reference, but no explanation for the codes. You can modify the codes yourself for your own need. Moreover, we only provide Hex files for Boot Loader but no codes.
- The accessories might be a little different from what you've seen on webpage since the accessories you received might be from different batch. However, it won't affect your use. Sure Electronics assumes no liability for any ambiguity caused by the product photos
- Because of the limitation of hardware facility, the dot after the first segment can’t be light up.The other dots are normal,Please take caution before you place the items
Documents:
Keyword:
|
