|
EMF AF Confirm Nikon Lens To Canon EOS Adapter (Type B) |
We Ship from UK -
|
Product Informatio |
Nikon mount lens to Canon EOS mount camera.
You can:
1. Set the maximum aperture on lens
2. Set the desired aperture on camera
3. Focus and meter the object, when focus is achieved.
4. Set the lens aperture to the same desired aperture
as the camera setting
5. Press shutter button and take the picture.
And you can also:
1. Set the maximum aperture on lens
2. Set the aperture value on camera to maximum lens aperture
3. Focus and meter the object, when focus is achieved.
4. Set the lens aperture AND the camera aperture setting
to the desired
aperture.
5. Press shutter button and take the picture
Shooting and nor recording exposure aperture setting
1. Set the aperture value on camera to the lens’ maximum aperture
2. Set the camera to AV mode
3. Set the desired aperture on lens
4. Focus and meter the object and take the picture.,
Exposure aperture data recorded in EXIF is
the lens’ maximum aperture.
How to setting up the EMF Chip Smart Adapter
1. Attach the adapter to
the lens and attach the lens to the camera when camera
is powered off. Power on
the camera and set the camera to Manual mode.
Set the camera in single shoot
drive mode.
Set the shutter speed to 1/60 second and aperture increment step to
1/3 EV.
Notice: Do not set the camera in continuous shooting
mode to avoid
misopertations.
2. Turn the aperture setting dial and set the aperture value to F/64 and
press
shutter button once.
3. Turn the aperture dial and set the aperture value to F/57 and
press shutter
button once.
4. Turn the aperture dial and set the aperture value to F/64 and
press shutter
button once. The operation combination
of F/64-shutter
button+F57-shutter button +F/64-shutter button will activate
the setting
mode of the ring.
5. Turn the aperture dial, if the maximum aperture value can be set to F/1.0,
your ring is now in setting mode. And you can begin to set the focal length,
maximum aperture value and focus micro adjustment of your lens.
How to enter values in
setting mode
1. When setting up the ring, you will need to enter some values. In setting
mode,
the ring interprets specified aperture values to numbers. The conversion
rule is
stated in the beneath chart:
|
F/2.0 |
F/2.2 |
F/2.5 |
F/2.8 |
F/3.2 |
F/3.5 |
F/4.0 |
F/4.5 |
F/5.0 |
F/5.6 | |||||
|
0 |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
The ring has THREE setting modes
Mode 0- enter lens’ maximum aperture.
Mode 1- enter lens’ focal length.
Mode 2- enter lens’ focus micro adjustment.
Turn the aperture dial to specific aperture value and
press shutter button to enter a desired setting mode.
For example, if you want to enter the lens’ maximum aperture,
turn the aperture dial to F/2.0[which means Number 0 to the ring]
and press shutter button. You are setting the ring in maximum
aperture enter mode.
Enter the maximum aperture
1. Turn the dial and set the aperture to F/2.0 and
press shutter button to enter this mode.
2. Turn the dial and set the aperture to the actual maximum
aperture of your lens and press shutter button.
The maximum aperture will be registered in the ring.
The ring accepts aperture value ranging from F/1.1 to F/4.5
Notice
Do not set the maximum to F/1.0. This value is reserved for
engineering purpose
and will not be accepted by the ring.
Do not set the maximum aperture smaller than F/5.6.
The focus detecting system
of your digital camera might fail to
function properly when a lens slower than
F/5.6 is attached.
Store the parameters to emf chip
Enter the focal length
1. Turn the dial and set the aperture to F/2.2 and
press shutter button to
enter this mode.
2. Focal length can be set from 1mm to 65535mm.
The ring needs five numbers to
store the focal length data.
If the focal length of your lens is smaller than
five digits,
you need to insert zeros in front of actual numbers.
Each time you choose a number, press shutter button to enter.
Installation Enter Focus Micro Adjustment
1. Turn the dial and set
the aperture to F/2.5 and press
shutter button to enter this mode.
emf chip accepts focus micro adjustment value, ranging from 0 to 31.
The value
is defined by two numbers. If the micro adjustment value of
your lens is
smaller than two numbers, you shall insert a zero in front of
the actual
number. Choose the desired number and press shutter button
to enter the value
one by one.
Store the parameters to
EMF Chip
For example, if the
micro adjustment value is 25,
you shall enter F/2.5 - shutter button + F/3.5 –
shutter button
Notice: Please enter the micro adjustment value according to your own tests.
The value shall not be entered based on calculation alone.
Installation Stored the
parameters to EMF Chip
When you finish entering all the parameters of your lens,
you shall store them in the ring for normal shooting. Here is how:
Change the aperture value to F/57, press shutter button once.
Change the aperture value to F/64, press shutter button once.
Change the aperture value to F/57 again, press shutter once.
If all the values you’ve entered are correct, the above three
steps will store all the parameters you’ve just entered to the chip on emf chip.
If you have miss some steps in the entering process or the value you’ve
entered does not fit the value range requirement stated above,
the ring will automatically exit setting up mode and no parameters
will be stored in the ring.
All the data stored in emf chip will not lost when camera is powered off.
The default parameter settings of emf chip is 50mm F/1.4, please
change the parameters according to your lens’ specifications.
Caution
1. Do not touch the golden contact points of the circuit board of emf chip
when attaching and detaching the ring to your lens and camera.
2. Do not use F/64-shutter + F/57- shutter + F/64 – shutter combination in
normal shootings. This combination will set emf chip to setting up mode.
If you unintentionally enter this mode, choose a aperture value between
F/6.3 and F/51 and press shutter button once to exit.
|
Package Include |
|
Shipping Terms |
Item will be shipped from China.
We ship your item to the address that you given on EBAY. Please double check your address to ensure it is CORRECT.
Delivery may be delayed during weekends and holidays .We strive our best to provide you the most reliable, affordable way of shipping service.
But sometimes delivery is highly depended on the Courier Company and local customs, especially for international shipping.
If you haven't received the items you bought in the expected time noted above, please contact our customer services so that we could check the problems out for you.
Shipping from China has already saved you the custom fee and tax within Europe. As the buyers in other areas, please check the custom policy in your countries before making orders.
We accept Paypal only
All payments must be submitted within 3 days after the auction has ended. If payment has not been received after that period, your item will be re-listed or sold to another bidder and a non-paying bidder report will be automatically filed with eBay.
By bidding on our auction, we will assume that bidder had accepted our terms & conditions.
|
Return Policy |
No refunds are offered. Only defective product will be offered exchange or store credit.
Defective products must be returned within 30 days from the date you place your order.
It may take up to 3 business days to process your return after we receive your product.
|
Contact Us |
Feedback is important to all of us participating on eBay. We'll leave you positive feedback after receiving your payment and we sincerely hope that you could leave us positive one as well as 5 STARS DSR rating if you take the purchase to be a nice experience.
If there may have a problem for our item and you would like to leave negative/neutral feedback, please contact us first as we will make every effort to make sure all our customers happy.
