This auction is for Open429Z-D Standard

STM32 development board designed for the ST official tool 32F429IDISCOVERY, and integrates various standard interfaces, pretty easy for peripheral expansions.

Overview

Open429Z-D is an STM32 development board designed for the ST official tool 32F429IDISCOVERY, which features the STM32F429ZIT6 microcontroller onboard.

The Open429Z-D supports further expansion with various optional accessory boards for specific application. The modular and open design makes it the ideal for starting application development with STM32 series microcontrollers.

What's on the mother board

STM32F429ZIT6 development board on board resource

32F429IDISCOVERY socket: for easily connecting the 32F429IDISCOVERY
MCU pins connector: all the MCU I/O ports are accessible on expansion connectors for further expansion
USB connector: USB to UART via the onboard convertor PL2303
I2C1/I2C2 interface: easily connects to I2C peripherals such as I/O expander (PCF8574), FRAM (FM24CLxx), etc.
I2S2/I2S3/I2C1 interface: easily connects to I2S peripherals such as audio module, etc.
DCMI interface: for connecting camera
SDIO interface: for connecting Micro SD module, features much faster access speed rather than SPI
CAN1 interface: communicates with accessory boards which feature the CAN device conveniently
CAN2 interface: communicates with accessory boards which feature the CAN device conveniently
UART3 interface: easily connects to RS232, RS485, USB TO 232, etc.
SPI1/SPI4 + AD/DA interfaces:
- easily connects to SPI peripherals such as DataFlash (AT45DBxx), SD card, MP3 module, etc.
- easily connects to AD/DA modules (SPI1 features AD/DA alternative function)
UART2 interface: easily connects to RS232, RS485, USB TO 232, etc.
8-bit FMC interface: easily connects to peripherals such as NandFlash
SAI1 interface: for connecting audio modules like UDA1380 module
ONE-WIRE interface: easily connects to ONE-WIRE devices (TO-92 package), such as temperature sensor (DS18B20), electronic registration number (DS2401), etc.
5V DC jack
5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
JTAG/SWD interface: for debugging/programming
Joystick jumper
- short the jumper to connect the joystick to default I/Os used in example code
- open the jumper to connect the joystick to custom I/Os via jumper wires
Boot mode switch: for configuring BOOT0 pin
USB to UART jumper
AMS1117-3.3: 3.3V voltage regulator
PL2303: USB to UART convertor
12MHz crystal
5V DC power switch
Power indicator
UART1 indicator
Joystick: five positions

What's on the 32F429IDISCOVERY

STM32F429ZIT6 microcontroller featuring 2 Mbytes of Flash memory, 256 Kbytes of RAM in an LQFP144 package

On-board ST-LINK/V2-B

mbed™ -enabled (mbed.org)

USB functions:

debug port
virtual COM port
mass storage

Board power supply: through the USB bus or from an external 3 V or 5 V supply voltage

2.4" QVGA TFT LCD

64-Mbit SDRAM

L3GD20, ST MEMS motion sensor 3-axis digital output gyroscope

Six LEDs:

LD1 (red/green) for USB communication
LD2 (red) for 3.3 V power-on
Two user LEDs: LD3 (green), LD4 (red)
Two USB OTG LEDs: LD5 (green) VBUS and LD6 (red) OC (over-current)

Two push-buttons (user and reset)

USB OTG with micro-AB connector

Extension header for LQFP144 I/Os for a quick connection to the prototyping board and an easy probing

Comprehensive free software including a variety of examples, part of STM32CubeF4 package or STSW-STM32138 for legacy standard libraries usage

32F429IDISCOVERY: TOP LAYOUT
32F429IDISCOVERY what's onboard

32F429IDISCOVERY: BOTTOM LAYOUT
32F429IDISCOVERY what's onboard

Photos

Open429Z-D development board

Open429Z-D development board back view

Open429Z-D connecting to a programmer

Connecting to various peripherals

STM32 Cortex-M4 MCU board

Connecting to USB device via convertor cable

Connecting to UDA1380 Board

Connecting to OV7670 Camera Board

Connecting to RS232 Board

Connecting to RS485 Board

Connecting to USB UART Board

Connecting to CAN Board

Connecting to 8 Push Buttons

Connecting to 5 IO Keypad

Connecting to AD Keypad

Test Board on the AD/DA port

Connecting to FRAM Board

Multi I2C peripheral Module connected to the I2C bus

Connecting to DataFlash Board

Connecting to VS1003B MP3 Board

Connecting to NRF24L01 RF Board

Connecting to Micro SD Storage Board

Connecting to NandFlash Board

Connecting to any accessory board you need

Note:
The 32F429IDISCOVERY integrates ST-LINK/V2-B for programming/debugging (SWD only).

JTAG/SWD interfaces

The figure 1, and 2 show the header pinouts of JTAG/SWD interface

Figure 1. JTAG Header Pinout

Figure 2. SWD Header Pinout

Development Resources

Schematic
Demo code (examples in C, μC/OS-II)
Related software (KEIL etc.)
STM32 Datasheets
STM32 development documentations

Wiki: www.waveshare.com/wiki/Open429Z-D

Package Contains

Open429Z-D mother board x 1
4-pin 2-pin wires pack x 1
USB power cable x 1

Terms & Conditions
Payment:	· PayPal is the only method of payment that we accept.
Shipping:	· We ship items to Worldwide! · Please confirm your address in paypal, phone number is also very important. · All items will be shipped within 48 working hours on receipt of cleared payment. · We'll add a tracking number after sending the item so that you can track your parcel.
Returns Policy:	· We are happy to return any unused item in its original packaging within 14 days of delivery. · Buyers are responsible for the round(two-way) shipping cost.
Feedback:	· We'll leave POSITIVE FEEDBACK on receipt of cleared payment. · If you're satisfied with the item and our service, please leave POSITIVE FEEDBACK, it's important to us. · Once any problems occured, please contact us first. We'll try our best to work things out.
FAQ:	· More details(Click)

If you have any question, please feel free to contact us. It's our pleasure to serve you!
We appreciate your business!