YN-622N-TX
Description:
This product adopts flexible LCD menu control, supporting mixed use of the A/B/C three groups of flashes using i-TTL, manual, or super sync flash mode, can be adjusted the exposure compensation or flash output of each group. In addition, it supports setting different focal length(zoom)of the three groups of flash, the remote-controlled distance can reach 100M, supporting seven wireless channels and A/B/C three groups, and equipped with the AF-assist beam emitter. Support USB firmware upgrade.
Functions:
- *LCD screen display, multi-buttons quick operation.
- *The firmware can be upgraded through the USB interface.
- *Support wireless shutter release function.
- *The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately.
- *Equipped with the AF focus assist light (can be disabled).
- *Grouping flash mode: i-TTL/Manual flash/Super sync.
- *Supporting mixed use of the A/B/C three groups of flashes with i-TTL, Manual flash, or Super sync flash mode.
- *The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately.
- *Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s.
- *Support exposure compensation, flash value lock function(FVL).
- *Support simulate (modeling) flash, red-eye reduction flash.
- *Support the flash zooming (auto).
- *Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows.
- *Settings saved automatically.
- *The flash sync signal can be input through the PC port.
- *Support the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (non Nikon body).
(The above functions need to be used with the YN-622N transceiver.)
YN-622N
Description:
YN-622N i-TTL wireless transceiver is a high performance 2.4G wireless flash trigger designed for Nikon users. Different photographic effects can be produced through setting the flash at 360 degrees.
It supports i-TTL and manual flash, front-curtain sync, rear- curtain sync and high-speed sync(Auto FP), the highest sync speed is 1/8000s*.
It can remote change flash exposure compensation or flash output of each group, supports different flash modes.
Supports the transmitter installed i-TTL flash, in addition, it supports the master unit on transmitter sets the parameters of each group.
This product is a wireless transceiver design, the distance of remote control reaches 100M, supporting 7 wireless channels and A/B/C three groups, and with AF assist beam emitter function.
Functions:
- *Compatible flash mode: i-TTL, Manual flash
- *Compatible Shutter sync: front-curtain sync, rear- curtain sync and high-speed sync(HSS/FP),
- the highest sync speed is 1/8000s*
- *Support remote set the parameters of flash through the transceiver (Remote Control Mode)
- *Support i-TTL/Manual/Repeating flash mode mix using(Mix Control Mode)
- *Support the flash installed on transmitter(on-top flash)and supports i-TTL function
- *Support the use of master unit on transmitter sets the parameters of each group(Master Control Mode)
- *Support FEC, FVL function
- *Support modeling flash and red-eye reduction flash
- *Support flash zooming (auto)
- *Built-in AF assist beam emitter (AF Lamp)
- *Settings saved automatically
- *Compatible with YongNuo/ Nikon series flashes
- *Support PC port triggering strobe flashes
- *PC port support front/rear curtain sync and high-speed sync(Super Sync)function
- *Support single-contact of camera & flash triggering (max sync speed is 1/250s)
-
Please note:
- Compatible cameras/flashes is needed when using TTL function.
- The highest sync speed of some camera types is 1/4000s, some of flash or camera models may reach to 1/250s only or less if it doesn't support high sync speed.
Compatible Camera List:
Nikon: D70, D70S, D80, D90, D200, D300S, D600, D700, D800, D3000, D3100, D3200, D5000, D5100, D5200, D5300, D7000, D7100
Compatible i-TTL Flash List:
Yongnuo YN-465N, YN-467N, YN-468II, YN-565N, YN-568N
Nikon SB-400, SB-600, SB-700, SB-800, SB-900, SB-910
Package Include:
