Package  Include:

• 1 x Receiver: S1FU-DC12 (Inversion Control  Mode)
• 2 x Transmitter: C-3-2
• 1 x DC Motor
• 1 x User manual

  Feature:

• Wireless control, easy to install
• Control motors of rolling blinds / doors,  projection screens, awnings, pumps, winches, conveyors or other appliances and  mechanicals with voltage DC 12V.
• You can turn on/off the receiver with  transmitter (remote control) from any place within a reliable distance; the  wireless signal can pass through walls, floors and doors.
• With characteristics of reverse power  protection and over current protection
• Audible / visual indication
• Use microcontroller model of EM78P156, an  8-bit microprocessor designed and developed with low-power and high-speed CMOS  technology.
• Reliable control: The transmitter (Encoding)  and the receiver (Decoding) use an 8-bit code.
• One/several transmitters can control  one/several receivers simultaneously.
• If you use two or more receivers in the same  place, you can set them with different codes.
• Transmitting  Frequency: 315MHz / 433MHz (And we can also offer 433MHZ,if you want, please  contact us.)

  Receiver:

• Model No.: S1FU-DC12
• Control Modes: Inversion (Toggle, Momentary, Latched)
• Coding Type: Fixed code
• Coding Setting: By learning
• Power Supply (Operating  Voltage): DC12V±1V (S1FU-DC12)
• Output: DC12V (S1FU-DC12)
• PCB size: 67mm x 50mm x 18mm
• Case size: 75mm x 54mm x 27mm
• Static Current: ≤6mA
• Maximum Working Current:  10A

  Transmitter:

• Model No.: C-3-2
• Channel: 3 CH
• Remote Control Distance:  100m / 300ft (theoretically)
• Encode: Fixed code by bonding pad encoded
• Unit size: 58mm x 39mm x 16mm
• Power Supply: 1 x 23A  -12V battery (included, can be used for 12 months)

  Usage:

• Connect the motor to Terminal B of relay  1 and relay 2.
  Setting different control modes (We have set the receiver as Toggle control mode  before delivery. If you want to use other control modes, do as following  operation):
  　
• Setting control mode  Toggle: Only connect Jumper-2.
  Control mode Toggle: Press -> Rotate; Press again -> Stop.
  Press button ▲: Terminal B of relay 1 and relay 2 output ＋ DC 12V (1: ＋, 2: －),  motor rotates in the positive direction.
  Press button ▲ again: Terminal B of relay 1 and relay 2 no output, motor stops
  Press button ▼: Terminal B of relay 1 and relay 2 output － DC 12V (1: －, 2: ＋),  motor rotates in the reversal direction.
  Press button ▼ again: Terminal B of relay 1 and relay 2 no output, motor stops
  　
• Setting control mode  Momentary: Only connect Jumper-1.
  Control mode Momentary: Press and hold -> Rotate; Release -> Stop.
  Press and hold button ▲: Terminal B of relay 1 and relay 2 output ＋ DC 12V (1:  ＋, 2: －), motor rotates in the positive direction.
  Release button ▲: Terminal B of relay 1 and relay 2 no output, motor stops
  Press and hold button ▼: Terminal B of relay 1 and relay 2 output － DC 12V (1:  －, 2: ＋), motor rotates in the reversal direction.
  Release button ▼: Terminal B of relay 1 and relay 2 no output, motor stops
  　
• Setting control mode  Latched: Do not connect Jumper-1 and Jumper-2.
  Control mode Latched: Press button ▲ and ▼ -> Rotate; Press button ■ -> Stop.
  Press button ▲: Terminal B of relay 1 and relay 2 output ＋ DC 12V (1: ＋, 2: －),  motor rotates in the positive direction.
  Press button ▼: Terminal B of relay 1 and relay 2 output － DC 12V (1: －, 2: ＋),  motor rotates in the reversal direction.
  Press button ■: Terminal B of relay 1 and relay 2 no output, motor stops

   Informations for DC motor:

  Feature:

• Gearhead motor
• High quality
• With metal cover
• Built-in cooling fan
• Heavy duty design
• Runs in either direction by reversing power supply polarity
• Benefiting from high torque and low noise, this motor is solidly  constructed and ready to install in numerous applications

  Specifications:

• Diameter: 37mm
• Length (excluding shaft):  92.5mm
• Total length: 119mm
• Shaft length: 15.5mm
• Shaft diameter: 6mm
• Front panel 3.0mm Screw  for fixing this motor
• Nominal voltage: 12V DC
• Operating voltage range:  3 - 18V DC
• No load speed at 12 V:  16rpm/32rpm/54rpm/100rpm/295rpm/868rpm/2000rpm
• No load current: 1.6A
• Load speed: 46 rpm/14  rpm/27 rpm/85 rpm/250 rpm/738 rpm/1600 rpm
• Load current: 1.5A
• Operating torque: 45kg.cm
• Stall torque: 180kg.cm
• Stall current: 7A
• Gear ratio: 1:305
• Power: 60W
• Weight: 340g

  Application:

• Mainly used for  remote-controlled car, electric motorbike, ATV, Kart, robot, rolling blind and  electric projector, etc.

  Warning:

• Do not frequently stall  the motor, or else the gear of motor will be broken.
• Owing to large torque and  high power, the starting current of motor is relatively large, up to 6A. After  starting the motor, the current will be back to normal, about 1A~2A. You should  choose high power supply above 10A, or else you cannot start the motor.