Item part number FRM220-CH08-AC (90-260V AC switching power supply for FRM220-CH08 rack 19" wide, 1RU, 8 slot chassis)

Description of the whole FRM220 chassis system
FRM220-CH08 is a 8 slot chassis for fiber optic media converters. Any FRM220 series media converter can be inserted in an FRM220-CH08 chassis. All FRM220 series media converters sold by sales_fo4all on eBay support the large FRM220-CH08 or FRM220-CH20 chassis installation by simple metal cover removing and sliding the card converters into the main chassis. Currently supported line cards include Ethernet to fiber converters for 10/100Base-TX, or 10/100/1000Base-TX over multimode fiber (up to 2 km), single mode fiber (up to 120 km) or utilizing WDM (up to 40 km). WDM (Wave Division Multiplexing) converts each input-output data stream into separate wavelengths of light and transmits/receives these channels through the same optical fiber. There is alos a good selection of 10G rate transponder cards. Besides, FRM220 line cards can also support G.703 E1/T1, Datacom (V35, X.21, RS530/ 449/ 232) and Serial (RS485/ 422/ 232) data communication interfaces over fiber.

General features of the FRM220-CH08 chassis:

• 1U, 19" (or optional 23") rack with convertible standalone units, chassis accommodates up to 8 units
• CPE Remote status monitor
• Loop-back test
• Once the converter is installed, it is hot-swappable to avoid any other network downtime. Also, the power does not have to be off when inserting another converter
• Rack with Dual power modules designed for redundant power application, AC and/or DC, cooling fans included
• Supports an auto recovery function, the system can restore all functions back to normal working status when the power or the connection is resumed
• SNMP, console, telnet, web based management
• TFTP Firmware upgrade
• Windows Based GUI

The FRM220-CH08 chassis has 3 major parts:

• FRM220-CH08 - metal chassis frame (accepts 2 power supply units and NMC management card system) - the chassis can be loaded with up to 8 media converters from the FRM220 series     family (any of the media converters supplied by sales_fo4all on eBay can be installed in the FRM220 series chassis)
• FRM220-CH08-AC - AC 90-260V power supply for FRM220-CH08. If the redundancy power supply protection feature needs to be enabled, two power supply units must be ordered for each chassis. One nice feature is the ability to mix AC and DC power supply units on a single FRM220-CH08 or FRM220-CH20 chassis.
• FRM220-CH08-DC48 - DC 36-72V power supply for FRM220-CH08 chassis
  
• FRM220-NMC - management module that offers web/SNMP/telnet management features for centralized monitoring of the fiber media converters. The NMC card comes with MIB files easy to compile into an existing central NMS(Network Management System).

IMPORTANT NOTICE:
The product on sale here is the FRM220-CH08-AC power supply unit only. To have an operational FRM220 chassis, you MUST purchase at least the main metal chassis - the FRM220-CH08. Both power supply versions, as well as the NMC management card can be found in this section of the store.


Technical specifications:

Material	Stainless paint
Power	AC	90 — 264 VAC
	DC48	-36 — -72 VDC
Environment	Temperature	0 — 50°C (Operating)
		0 — 70°C (Storage)
	Humidity	20 — 80% non condensing (Operating)
		10 — 90% (Storage)
Power Consumption	80W
Dimensions(WxDxH)	440mm x 280mm x 130.6mm
Weight	9.875kg (include 1 AC power modules & two ear panels for rack-mounting)
Compliance	FCC part 15 class A, CE Mark
MTBF	63,000 hours

All products sold by Fiber Optic for All come with 2 years manufacturer warranty.

---