10ML CRYSTAL REPAIR UV RESIN, GLUE FOR GLASS, METAL, FURNITURE + 9 LED UV TORCH

Uv Glue user manual (Crystal repair)

UV adhesive is a transparent, liquid adhesive which can be cured within

Seconds with the help of UV light source It can be used in various ways for the fixing and adhesive bonding for glass,metal,plastic.

The key factor is one side has to be transparent, which means uv light source must directly expose to the uv glue.

For example: you cannot bond two part of metal together. The common feedback is “this glue doesn’t stick even two piece of paper”

One side must be transparent to the uv source to be able to cure the adhesive

it is best to cure in layers, uv light need to penetrate in to uv adhesive, use a small amount first cure it with uv source, repeat the process

If uv light doesn’t reach the uv glue YOU CAN NOT CURE IT

NOTE***

-DO NOT USE UNDER DIRECT SUNLIGHT

-KEEP THE UV ADHESIVE IN ORIGINAL PACKING

-Do not leave the lid open

Instruction for use

 

-remove the bottle lids and insert the brush on to the cap

-apply required amount

-use the uv torch/laser pen (if supplied)

-Distance should be between 2cm to 7cm

-uv glue start getting hard after 40 to 60 seconds (depends on amount applied can take longer if used more)

- After glue harden place it under direct sunlight for least 2-3 hours even on a cloudy day

-The uv glue might stay tacky/sticky after curing with torch/laser pen etc.. Please leave under direct sunlight for couple hours, uv glue will bone dry.

 

Safety measures / warnings

 

Avoid contact with skin, eyes and clothes.

 

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.

 

Wear suitable gloves.

 

Keep away from open fire and sources of ignition.

 

Protect from heat

 

Shelf life 1  year from date of purchase

Keeping temperature 4 Celsius degree to 28 Celsius degree