Upgraded of Autel MS906BT/MK906BT, this Autel MaxiCOM scanner offers advanced E~CU Co-ding same as MS908/MK908. It is one of the most valuable functions in a high-end diagnostic scanner, great for professionals, also for DIYers who are skilled enough to set up new car modules, or customize vehicle builds as much as possible:

• Setup New E~CU Modules: making sure the newly-installed E~CU modules work in harmony with the rest of the vehicle system after repair or replacement.
• Upgrade Car Performance: make the moving pointer perform self check, display the amount of fuel consumption, activate beep sound, one press to close all windows, flash all brake lights during emergency braking, make turn signal light & rear fog light alternatively flash, activate & deactivate daytime running lights …
• Fix Complex E~CU-controlled Issues: low fuel efficiency, mysterious power loss, unknown fault in mechanical parts …
• Disable Annoying or Unneeded Car Functions like automatic start/stop.

**Available Co-ding operations vary by the test vehicle, and only the available operations display in the menu.

The Difference Between Online and Offline Co-ding

• Online Co-ding, online to obtain the initial code of the current module of the current vehicle and rewrite it. MK906Pro supports online Co-ding for B-M-W, Porsche, VW, Nissan, Infiniti, Nissan-GTR, Hyundai, etc.
• Offline Co-ding, is generally used for backup and restoration of vehicle component data. MK906Pro supports offline Co-ding for VW, Audi, Skoda, VW-CV, Bentley, Bugatti, LT3, Opel, Vauxhall, Mitsubishi, Porsche, Renault, Ford, Mazda, Subaru, Hyundai, Land Rover, Jaguar, Toyota, Lexus, Peugeot, Citroen, etc.

This Autel Maxicom MK906 Pro comes with 36+ service functions and can be updated constantly for wider vehicle coverage, more functions, and functional optimization, to meets all your needs for various scheduled repairs or maintenance.

• The commonly used 26 special functions for fast maintenance:

Oil Reset, EPB, TPMS, BMS, Brake Bleed, DPF SCR Aftertreatment, IMMO keys, Injector, SAS, Suspension, Throttle, WIN DR ROOF, Seats, Odometer, Lang change, Headlamp, CHG tire size, TEC learn, ABSSRS, Cylinder, VGT learn, Speed & PTO, Clutch, Trans adaptation, Airbag reset, and A/F Setting.

• Various advanced special functions for different models to greatly improve work efficiency:

For Ford: Power balance, Clear the transmission adaptive tables, etc.

For GM：Crankshaft position variation learn, Cylinder power balance, RPM control, etc.

For Honda: Torque sensor learn, TPMS sensor position check, Brake pressure sensor, etc.

For JEEP: Erase all ignition keys, PCM replaced, E~CU initialization, Initialize ESP sensor, Cylinder balance test, Activate/Deactivate front seat video, etc.

Note: Autel Maxicom MK906PRO is the same as Maxisys MS906 Pro and Maxicom MK908 , and its 36+ special functions are updating to include more.

Upgraded from MK808, MK808BT,MK808TS,MP808,MP808K,MP808BT,MS906,MK906BT, MS906BT, same as MK906 Pro, Autel diagnostic tool MK906BT features Bi-directional Control, also known as Active Test or Actuator Test. It can output the commands to E~CUs, read the E~CU data to determine the integrity of system or parts, and monitor the operation of the actuators, letting you quickly know if a specific system, component, or a subsystem is functioning properly or not.

What can Bi-directional Control do?

• Switch the SRS light on and off
• Turn the fuel pump on and off
• Cycle the a/c clutch on and off
• Perform an evaporative emissions leak test
• Compatible with 99% cars in the market
• Fast troubleshooting your car, far more than just reading codes
• Best Choice for Technician, garage, car dealer, auto repair shop, automotive engineer, diagnostic tech, truck man, automobile tech, home mechanic

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Upgrade version of MK808/MK808BT/ MP808/MP808K/MS906/MK906BT/MS906BT/MS906TS, Diagnose like an OEM Scanner.

OE-Level All Systems Diagnoses: shorten the diagnostic time and reduce the diagnostic fee.

• Super fast and accurate diagnosis for all systems

This Autel diagnostic tool can access all available systems, such as Engine, AT, ABS, SRS, IMMO, air conditioning system, steering angle system, air suspension system, etc. and perform OE-level diagnoses, which enable the mechanics/workshops to perform the same level of diagnosis, analysis, and maintenance as the OEM dealer.

• Enhanced AutoVIN & AutoScan, and new VIN Scan ways (scan license/plate/VIN) to automatically read & store VIN number in seconds, saving your manual data input.
• PreSCAN & PostSCAN for a more efficient repair plan.
• Stable Wireless BT Connection: offers quick data transmission.
• VCI200 box serves as a VCI for you to stay wirelessly connected and work from anywhere in the service bay.

          

AutoAuth For FCA& SGW

With the new version V9.50 UPDATING on Autel scanner MK906 PRO, you will have access to the sE#CUrity gateway module on 2017 and newer Fiat Chrysler vehicles, so that the diagnostic tool can clear codes, run bi-directional active tests, actuations, relearns or even IMMO K~y Pro-gramming (pulls PIN & write), ADAS calibration assistance etc.

VAG Guided Function

Designed with VAG Guided Functions, Autel maxicom MK906PRO provides on-screen instructions for you to complete some complicated maintenance or functions (SAS calibration, E~CU Co-ding, etc.) gradually on VW, Audi, Seat, Skoda, etc.

           

Refresh Hidden Features

Autel MK906 Pro scan tool enables you to make full use of the hidden features of VW, BMW, Seat, Porsche, Renault, etc. e.g., Auto Park function, tilting rear-view mirrors, unfolding mirrors, etc. This function depends on the electronic features already built in.

K~y Fob Pro-gramming

With IMMO Keys function, automotive diagnostic scanner MK906 Pro can disable or clear info of the lost vehicle keys, add new keys, Pro-gram the replacement K~y fob for most Asian and American vehicles. Note: Not available for BMW, Benz, Audi, etc. Please check compatibility before order it. For professional K~y pro-grammer please refer to IM608 PRO.

                 

Expanded Car Coverage

This diagnostic scanner Autel MK906Pro has the 2022-improved vehicle coverage of 99% worldwide models made in 1996-2022, even the most recent ones compatible with protocols of KWP, CAN, UDS, OBDII, and CAN-FD (e.g. GM cars: 2020 TRAX, Cavalier, GL8 Avenir ...), also DoIP (e.g. Volvo, Land Rover/Jaguar, BMW F/G Chassis …), as ONE versatile scan tool to handle a long fleet of varied vehicles coming into your workshop.

Ultra-Level Hardware

As the 100% genuine state-of-the-art Autel diagnostic tool in MaxiCom series, MK906Pro boasts of the higher configuration than MS906Pro: more-mature Android10.0, faster 8-core processor, latest dual 16M cameras, and a large 8", 1920*1200, back-lit LED touchscreen. It makes use of remarkable 4GB+128GB SSD for you to get quick answers without delay. And the massive 11,600mAh battery gives this diagnostic scanner 10+ hours runtime of continuous use

Work with Service Tools

Got stuck in specific diagnostic scenarios? Combine with the following service tools to expand this Autel scan tool’s capabilities: (1) MaxiScope MP408 the 4-channel automotive oscilloscope, to test electrical signals; (2) MaxiBAS BT506 the battery tester, to get a thorough test of the vehicle battery; (3) MaxiVideo MV105 & MV108 the endoscope, to have up-close visual inspections in confined areas. Please note that they are sold separately.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Package Include:

Autel MK906Pro + MaxiVCI V200;

AC/DC Adapter (12V)*1;

Type-C USB Cable*1;

Auxiliary Power Outlet Adapter*1;

Spare Fuse*2, ;

Soft Cloth*1;

USB to Ethernet Adapter;

Carrying Case*1;

Packing List*1;

Quick Reference Guide*1