3E3D NOW YOU DON'T HAVE TO BUY A NEW CUP HOLDER INSERT EVERY TIME YOU UPGRADE YOUR MODs! This is a great accessory for keeping all your vape stuff right where you need it. Carry from the car to the house and back! The bottom of this cup holder insert is 63mm (2.5") in diameter and the top is 93mm (3.70") in diameter. The height is 145mm (5.78"). There are 4 holes. The large round hole is 1.33" or 34mm in diameter and is 60mm (2.39") deep. The two smaller holes are 19mm (0.75") in diameter and are 65mm (2.56") deep. The rectangular hole is 30mm X 65mm (1.20" X 2.56") and is 65mm deep. This accessory was made to fit a standard 30mL bottle of ejuice (or smaller), an ecig box mod and 2 spare batteries. There is also an option to prop your phone. NOW WITH REMOVABLE BOTTOM CUP FOR EXTRA STORAGE! It may also fit the Pioneer4You, eLeaf, Kanger, Kangertech, Vapor Shark, Innokin, Joyetech, Aspire, VaporFi, Tesla, Yihi, Hana, Solara, Smok, Simeiyue, Asmodus, Cloupor, Sigelei, IPV2, DNA 30, VTR, MVP, IPV MINI, DNA 20, Sigelei 100W, rDNA, Reo Grand, Reo Mini, ZNA 30, ZNA 50, SX MINI, Variant, IPV4, Sigelei 150W, Snow Wolf, DNA40, Xcube, eVic, KBox, Coolfire, iTaste Vox, ESP, eGrip, Disrupter, SubBox, T8, Boxer, Odyssey, Cherry Bomber, Deviate, IPV D2, xPro M65, VT BOX200 and iStick. Please check the dimensions of your MOD BOX before purchasing this item. PLEASE NOTE: IF YOUR ECIGARETTE IS SMALLER THAN 1.20" X 2.55" THIS CUPHOLDER WILL FIT IT PERFECTLY. I HAVE ADDED SLOTS AND 2 SPACERS SO THAT YOU CAN ADJUST THE WIDTH TO THESE SIZE STOPS: 30mm X 65mm (NO SPACER) 30mm X 59mm, 30mm X 56mm, 30mm X 55mm, 30mm X 53mm, 30mm X 50mm, 30mm X 47mm, 30mm X 44mm, and 30mm X 31.5mm. Please also check that your MOD is not wider than 2.56" or thicker than 1.20" due to control buttons or other features that stick out. This cupholder will cover up the bottom 2.56" of your MOD when you insert it, and anything that is bigger above that level is okay. Made on a Makergear M2 3D printer using high quality/high temperature ABS plastic. This item was made in the USA. *Please allow an extra two days for shipping on a customized item. A NOTE ABOUT ABS PLASTIC: THIS PLASTIC WILL NOT DEFORM OR MELT IN YOUR CAR. IT IS RATED UP TO 200 DEGREES F! IT IS ALSO DISHWASHER SAFE. (ECIG accessories not included in this auction.) Please check the dimensions of your MOD BOX(ES) before purchasing this item. This item will fit most of the current models of Box Mods. If you look up the dimensions for your MOD and it is in inches, just multiply the inches by 25.1 to convert to mm. If you look up the dimensions of your MOD, look at the width and depth and add 2mm to each. (You can disregard the height dimension.) Then compare those numbers to the dimensions specified for this cup holder. If you have a cover on your MOD, you may need to add 4mm or more to each dimension for a good fit. If you need a custom size, please use this auction to order: http://www.ebay.com/itm/CUSTOM-Car-Cup-Holder-Insert-Caddy-e-cig-MOD-BOX-3E3D-/252034621096?hash=item3aae6f1ea8