Klotz professional balanced microphone lead with Neutrik Male and Female XLR's. The cable has a special extremely flexible rubber-like PVC jacket, spiral shield and stranded copper inner cores. The cable has ultra-low capacitance (60 pF/m) for better clearer sound. Developed for high demands of everyday use on stage, touring, outdoor events and in the studio.

Klotz Pro Tour Grade Heavy Duty Lead Quality At Its Best

Custom made to order for you.

Choose your length from 0.25 m to 30 m from the drop down menu - cable cut to length then assembled

Choose Colour from the drop down menu

This lead is made up by us Ultimate Pro Audio Ltd in our workshops by professional technicians with many years of experience. We only use high quality components when making any lead this ensures you will always get a professional reliable lead that will not let you down when you are under pressure to perform at your best. Klotz and Neutrik are both made in Germany. We have looked at many cables on the market from all over the world and there very few that are as high quality as this cable. The connectors are one of highest quality that are available, made to the high specifications, CNC machined reliable and robust. We only use genuine Neutrik connectors NOT copies.

Cable Length

PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS

Leads 1m or less (patch leads) will be measured visible cable from the rear black boot of the connector. We add 100mm of cable FREE to compensate for the connectors.

Leads over 1m will be measured cut length of cable. The connectors use up 100mm of cable inside them.

If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through ebay messages.

We can make the lead to an exact length if you want - Order the lead that is slightly longer and message us through eBay.

If you want a longer lead let us know.

Typical Applications

To interconnect audio equipment with XLR's (3 pin) such as:

Handheld microphone to mixing desk

Mixing desk to amplifier inputs

Patching audio equipment in a rack etc

Connecting mixer output line level to active powered speakers

Signal input link between amplifiers

Note

This lead is for mic/line level signal and should never be used on the speaker output of an amplifier to connect a passive speaker.

Features

Ultra-low capacitance (60 pF/m)

Extremely flexible cable

Reliable and robust

OFC

Specification KLOTZ Mic Cable MY206

Conductor: stranded bare copper, 28 x 0.10 mm

Cross Section: 0.22 mm2

Insulation: PE

Core Arrangement: 2 cores + cotton tracers, twisted

Shielding: bare copper spiral shield

Outer Jacket: PVC, matt

Overall Diameter: 6.15mm

Min Radius: 30mm

Working Temperature: -20C / +70C

Conductor Resistance: 85 ohm/km

Capacitance:

Cond/Cond. 60 pF/m

Cond/Shield 110 pF/m

Insulation Resistance: > 100 M ohm x km