Klotz TRS Jack Lead 1/4" 6.35 mm

 

Klotz Neutrik Professional Tour Grade Heavy Duty Lead Quality At Its Best

Choose your length from 0.1 m to 30 m from the drop down menu.

Choose your cable colour.

KLOTZ professional balanced lead with Neutrik NP3X TRS 1/4" 6.35mm Jack Plugs in nickel

Developed for high demands of everyday use on stage, touring, outdoor events and in the studio.

The cable has a special flexible rubber-like PVC jacket, copper spiral shield OFC and stranded copper inner cores. The cable has ultra-low capacitance (60 pF/m) for better clearer sound reproduction.

This Cable Length - Important

Please measure up carefully, before order. All leads are made to order.

Leads 1m or less (patch leads) will be measured visible cable from the rear black boot of the connector. We add 100 mm of cable FREE to compensate for the connectors.

Leads over 1m will be measured cut length of cable. The connectors use up 100mm of cable.

If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through eBay messages.

We can make the lead to an exact length if you want - Order the lead that is slightly longer and message us through eBay. Lead is made up by us Ultimate Pro Audio Ltd in our workshops by professional technicians with many years of experience. We only use high quality components when making any lead this ensures you will always get a professional reliable lead that will not let you down when you are under pressure to perform at your best. Klotz and Neutrik are both made in Germany. We have looked at many cables on the market from all over the world and there very few that are as high quality as this cable. The connectors are one of highest quality that are available, made to the high specifications, CNC machined reliable and robust. We only use genuine Neutrik connectors NOT copies.

This listing is for one microphone/patch lead. Made by us in our workshop using our advanced solder equipment with 4 percent silver solder which gives a bright, shiny finish. The solder is lead free and when the solder joint is made it is made it an extremely strong joint. Well over 30 years experience soldering.

Typical Applications Examples

To interconnect audio equipment such as:

All have 1/4" 6.35 mm Input Outputs

Patching audio equipment in a rack etc

Connecting mixer output TRS to active powered speakers

Signal input link between amplifiers as a link

Input into mixer channel

Audio Interface

For Mic/Line level use.

Cable Length

 

PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS

Leads 1m or less (patch leads) will be measured visible cable from the rear black boot of the connector.

Leads over 1m will be measured cut length of cable. The connectors use up 100mm of cable - 50mm per connector.

If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through eBay messages.

We can make the lead to an exact length if you want - Order the lead that is slightly longer and message us through ebay.

If you want a longer lead let us know.

Note

This lead is for mic/line level signal and should never be used on the speaker output of an amplifier to connect a passive speaker. If you are after this type of lead please see our e shop for more leads.

Features

Ultra-low capacitance (60 pF/m)

Extremely flexible cable

Reliable and robust

Specification KLOTZ Mic Cable MY206

Conductor: stranded bare copper, 28 x 0.10 mm

Cross Section: 0.22 mm2

Insulation: PE

Core Arrangement: 2 cores + cotton tracers, twisted

Shielding: bare copper spiral shield

Outer Jacket: PVC, matt

Overall Diameter: 6.15mm

Min Radius: 30mm

Working Temperature: -20C / +70C

Conductor Resistance: 85 ohm/km

Capacitance:

Cond/Cond. 60 pF/m

Cond/Shield 110 pF/m

Insulation Resistance: > 100 Mohm x km

Please read Terms and conditions of the sale - Buying this item(s) means you accept these terms