808nm 100μm Aperture C-Mount Laser Diode With Low AR Coating

Description: This is an 808nm 100um Aperture 3W laser diode. The AR Coating of the laser diode is less than 0.4%. So it is very easy to lock the wavelength by using an external grating.  It was p-down bonded on C-Mount, which was made in the USA. It came to us with a lot of other electronic/opto-electronic related surplus. We have 26 such lasers in stock. The lasers are brand new not used.

 

 

Specifications:

Characteristics	Specification
	808nm 100um Aperture C-Mount Laser Diode with Super Low AR
CW output power (W)	3.0
Peak wavelength (nm)	804--806
Spectral width (nm)	≤4.0
Threshold current (A)	≤0.5
Operating current (A)	≤3.2
Slope efficiency (W/A)	around 1.1
Beam divergence θ∥×θ⊥ (deg.)	8/20
Wavelength temperature coefficient (nm/℃)	0.3
Emitting area (μm)	100×1
Lifetime(hour)	>10,000
Package	C-Mount
Data Sheet	Available for each diode

 

By Bidding, you must agree and accept:

·        You are over 18 years old and understand the dangers and risks of laser use, and will use this component responsibly.

·        You will use this component in a legal, safe manner to ensure audience and personnel safety.

·        You have a working knowledge of laser diodes. You understand ESD, and the static sensitivity of this component.

·        Laser beam is harmful for eyes during process. Please avoid any directly see on the aperture. Never shine laser beam on human or animals.

·        You accept these diodes as electronic components for integrating them into a system designed by yourself. You relieve the SELLER, and E-bay from any and all LIABILITY from damage or injury that may arise from use of this laser.

   If you are not serious, please do not place a bid.

 

 

Return policy:

·        We will test the lasers before shipment; buyer should contact us as soon as he find it is defective;

·        Refund request should be made within 14 days buyer receives the product;

·        Replacement request should be made within 30 days buyer receives the product;

·        Since this is a Do-It-Yourself laser diode, we only refund if the product arrive to be defective; so please use it gently and properly when you assemble your device; you also need to send back in original shape to get refund/replacement; we won't refund or replace if the laser was damaged by buyers;

 

 

Some tips for operating laser diode:

·        Please use a power supply with stable output. Transient current spikes should be avoided.

·        Please always connect the pins correctly.

·        Heat sink with good thermal dissipation is required for holding the laser otherwise the laser will be burned.

·        Please use eye protection when you operate the laser.

·        It is better to wear an antistatic wrist band.

·        You should always start with current well below the diodes maximum (about 3.2 amps in this case).