HobbyWing QUICRUN-WP-10BL60 Waterproof 60A Brushless ESC Introduction

1 Features

1.1 Water-proof and dust-proof for all-weather races. 
(Note: please uninstall the cooling fan before using this ESC in water; Clean and dry it soon after the use for avoiding the connectors get rusty.) 
1.2 External programming port, easy to connect to the Program Card when setting the ESC. 
1.3 Proportional brake with 4 steps of maximum brake force adjustment and 8 steps of drag brake force adjustment. 
1.4 9 steps of acceleration (/punch) adjustment from “soft” to “Very aggressive” to fit for different kinds of models, tires and tracks.
1.5 Multiple protections: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor lock-up protection. 
1.6 One-button (the “SET” button on the ESC) to set the ESC, and easy to reset all parameters to the factory default settings.
1.7 Compatible with the optional device ---- the portable Digital LED Program Card, especially convenient for outdoor use.

2. Specifications 

ModelQUICRUN-WP-16BL30QUICRUN-WP-10BL60QUICRUN-WP-8BL150
Cont./Peak Current/ Resistance30A/180A/0.002Ω60A/360A/0.001Ω150A/950A/0.00035Ω
Motor Type SupportedSensorless Brushless Motor
Car Applicable1:18 & 1:16 On-road/Off-road/Buggy/Monster1:10 On-road/Off-road/Buggy/Monster1:8 Buggy/Monster
Motor Limit

For 2S Lipo or 6 cells NiMH:
1. On-road: 2435-size or smaller motor with the KV<8000
2. Off-road/Buggy/Monster: 2435-size or smaller motor with the KV<5000

For 3S Lipo or 9 cells NiMH:
1. On-road: 2435-size or smaller motor with the KV<5500
2. Off-road/Buggy/Monster: 2435-size or smaller motor with the KV<3500

For 2S Lipo or 6 cells NiMH:
1. On-road: 3656-size or smaller motor with the KV<6000
2. Off-road/Buggy/Monster: 3656-size or smaller motor with the KV<4000

For 3S Lipo or 9 cells NiMH:
1. On-road: 3656-size or smaller motor with the KV<4000
2. Off-road/Buggy/Monster: 3656-size or smaller motor with the KV<300

For 4S Lipo or 12 cells NiMH:
4274-size or smaller motor with the KV<3000

For 6S Lipo or 18 cells NiMH:
4274-size or smaller motor with the KV<2400

　

Battery4-9 Cells NiMH
2-3S Lipo		4-9 Cells NiMH
2-3S Lipo		9-18 Cells NiMH
3-6S Lipo
BEC Output6V/1A (Linear Mode)6V/3A (Switch Mode)6V/3A (Switch Mode)
Size/ Weight36(L)*28(W)*16(H) / 38g48.5(L)*38(W)*32(H) / 90g59.5(L)*48(W)*42(H) / 178g
External Program PortNot AvailableAvailableAvailable
Working voltage of FanNo cooling fanFrom battery directly without regulatingFrom BEC (6V)


Castle CM36 6900KV Introduction

Racer Bob said that the 5700 was too slow and the 7700 was too fast, so we’ve introduced the 6900 and it’s just right! Castle is pleased to announce the newest addition to the mind blowing CM36 series of brushless motors which are the perfect compliment for the awesome Mamba Max controllers.

The 6900 packs lots of punch on 6 NiCad/NiMh cells and is incredible on 2S lipo, yet the 1/10th scale car, truck or buggy will still be (almost) controllable, unlike the 7700 which simply overpowers everything.

This motor is best compared to a 6T brushed motor on steroids, with none of the brushes or comms to ever wear out. These motors are all built to the highest specifications and feature high torque Neo magnets and oversize lifetime bearings with a hardened steel shaft turned down to a 1/8” pinion shaft.

SPECS
Part #CMS-6900
PriceDISCONTINUED
Input Voltage6-8 NiCad/NiMh MAX
2s LiPo MAX
Size1.4" dia. x 1.7"
Weight
(w/wires)		7.0 oz (198.4g)
Shaft SizeStandard 1/8" (3.2mm)
BearingsOversize ABEC-1 front and rear
Connector Type4mm gold connectors
NoteMotor wires OK to shorten