Complete Tent Kit 1.2 x 2.4 x 2m (2.4m Tent)
In this kit you will get the following item:
Ballast 600w ---- 600w Bulb Dual Spectrum ---- Reflector x 2
Tent - 2.4m
Swiftair Inline fan kit - Centrifugal fan, Carbon Filter,
Alu Ducting, Clamps
Supply Fan
Yo Yo Hanger (Pair) x 2
VitaLink Clay Pebbles 45litre x 2
Vitalink Pro Soil 50 Litre x 3
Vitalink Earth Grow & Bloom 5 Litre x 1
Vitalink Buddy 1 Litre x 1
20 Litre Round pots + Saurcers x 12
Essentials PH Pen x 1
Please see below for description on products:
The 600w Ballast, has been designed for improved quality and
high output,
✓ Metal Case
✓ Fitted with IEC connector cord
and UK mains lead
This produces the full light spectrum with added blue for
the propagation and vegging stages. We recommend you replace lamps every 3-6
months to avoid diminishing harvests.
Lamp size and output
600 watt - 90,000 Lumens
Please keep the retail packaging in case you need to return
it to us. Bulbs sent without the original packaging are not covered by warrant
SUPERB VALUE HYDROPONIC TENT 120 x 120 x 200
Quality Hydroponic Grow Room Tents
95 % reflective hammered silver lining
Heavy duty zips
Metal poles (please make sure these a pushed all the way in
on the side clip provided)
4 x Air holes (1 Left, 1 Right, 1 on Top & 1 Bottom)
Passive ventilation windows: 3
(we found the easiest way to put up is fix bottom half first
then top part and start from the back)
PowerPlant Heavy Duty Timer - Please select if needed
Normal household timers are not built to take the high
inductive loads produced by HID ballasts. If used with an HID ballast - the
contacts inside the timer that open and close the timed circuit will overheat
and weld together - breaking the timer and leaving your grow lights permanently
on.
The PowerPlant Heavy Duty Timer is different. It is designed
to take high loads and has no problem dealing with the inductive loads produced
by a 600w ballast.
This means no separate contactor is required and saves you
money. It has a 96 switching operations within a 24 hour period (every 15
minues).
This timer is suitable for timing one 600w HID ballast. It
has a robust case design with socket and timer dust/moisture covers. This unit
is ideal for timing 400w and 600w ballasts. Do not use more than one 600w
ballast per timer.