eBay

Top Quality Resin Motorcycle Tank Pad

honest-sal

Motorcycle Accessories

Exclusive to honest-sal ebay store

New premium tank protection pad

- Material: High quality, non yellowing PU (Polyurethane) resin

- Height : 20.3 cm

- Width (Top) : 14.4 cm

- Width (Bottom) : 6.5 cm

Installation Guide:

1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.

2. Without peeling, place the pad on the tank, align it and mark with paper tape.

3. Peel and apply the pad.

4. Press the air bubbles out.

5. Allow 12 hours for the pad to set in. Do not ride straight away.

6. Once it is completely stuck, spray some wax and wipe it clean for a perfect finish.

Note: In extreme cold, carefully use a hair dryer or heat gun to soften up the pad before application.

Feedback

- Please get in touch if you have any issues or questions.

- Don't just leave negative feedback as it won't solve the problem.

- Your satisfaction is our priority

Material: PU (Polyurethane) Type: 4 piece Fitment: Generic - Fits most - check tank size against dimensions below Height: 22.5 cm Width (Top): 16 cm Width (Bottom): 7.5 cm PU resin is soft and stays soft over time. Stay away from cheaper epoxy resin alternatives which become brittle. Tank pad installation guide (Duration 10-15 minutes): 1. Place the pad on the tank and see if it fits 2. In cold weather, you may need to soften up the pad using a hair dryer or heat gun. Be gentle 3. Crucial step: Use IPA cleaner to clean the tank of grease, wax, polish etc. The pad won’t stick on a greasy surface 4. Do not use petrol or methylated spirits as they do leave a very thin layer of grease 5. Move your bike on centre stand 6. Without peeling the pad, place and align on the tank. Use paper tape to mark position/corners 7. Use a hairdryer to soften the pad if it is cold 8. Apply the pad gradually ensuring it is within your marked area – use top down approach 9. Using a soft cloth, press it outwards from centre to squeeze air bubbles out 10. Ensure all corners are pressed in or the pad will lift Notes: 1. Please contact me first if you are experiencing issues. Don’t just leave a negative feedback 2. Use Isopropyl cleaner 3. Send me your photos if you can. If I use it in my listing, I will refund you half the pad’s price