This cable allows you to connect rear view cameras in Toyota / Lexus cars with OEM multimedia system of 5th generation 5GEN. The cable offers Plug&Play installation of aftermarket cameras without damaging the OEM wiring.
Image from the rear view camera will automatically be displayed on the screen when reversing. The device is connected to the 40 pin socket (marked red on the picture). After connection all OEM devices that work using this socket will not be disturbed and will continue to work as they did prior to the connection.
Note! Power of the additional rear view camera should be taken from the ACC line (first key turn), otherwise the camera input will not be active. Depending on the type of camera (more specifically, on the voltage required for work) +6 V output voltage of the monitor may be used. If the camera requires more than +6 V it should be connected to the ACC line.
Note! In some cases the head unit may not have a REVERSE wire. If that's the case, you need to extend the wire from the +12 V tailgate lamp as the cable will not work otherwise.
Camera Connection Cable
How It Works
Camera Connection Cable
Compatibility
Lexus
| Model | Model years | System | Additional compatibility conditions | |
|---|---|---|---|---|
| From | To | |||
| RX350 | 2007 | 2009 | MFD GEN5 multi-display | Cars with OEM navigation Cars without OEM navigation Cars without OEM park assist function |
| RX400h | 2007 | 2008 | ||
Toyota
| Model | Model years | System | Additional compatibility conditions | |
|---|---|---|---|---|
| From | To | |||
| Prius | 2006 | 2009 | MFD GEN5 multi-display | Cars with OEM navigation Cars without OEM navigation Cars without OEM park assist function |
| Prius Touring | 2006 | 2009 | ||
Note! Only NTSC format cameras are supported.
Package content and appearance may differ from those presented on the website. Please ask the sales specialist before purchase.
If you have any questions, please don't hesitate to contact us!