Rubber Motorcycle Tank Pad
Large Rubber Motorcycle Tank Pad
Universal Fit
Please use the measurements provided to check fitment on your tank.
Installation Guide:
1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.
2. Place the rubber pad on the tank, align it and mark with paper tape.
3. Peel white/yellow side of the adhesive and apply to the pad. Leave it for a few hours to bond.
4. Now peel the red side and attach to the tank. Use a precision screwdriver or a pin to find separation.
5. Allow 12 hours for the pad to set in. Do not ride straight away.
Note 1: The separate adhesive provided is double sided & clear in colour. Please ensure you peel both sides.
Note 2: Do not apply on fresh paint.
Note 3: Use a heat gun or hair dryer if you need to take the pad off.
- Material: Flexible Rubber
- Rubber pad with separate double-sided adhesive (included)
- Height: 21.5 cm
- Width: 16 cm (Top)
- Width: 10.5 cm (Bottom)
- Thickness: 3 mm