With Band Control Connections.
and most any transceiver
EXCEPT!!!
This cable is NOT for the Yaesu FT-950, FT-450, FT-DX1200 with the 10 pin mini DIN!
The Yaesu FT-950, FT-450, FT-DX1200 10-pin cables are available on a separate listing.
with auto Band Switching DIN, Mini-DIN, RJ-45, etc. connectors for
linear amplifiers or adaptors, (TOKYO HY-POWER, etc.), and others.
NOTE! This listing is NOT, repeat NOT for the
Yaesu FT-950, FT-450, FT-DX1200 with the 10 pin mini DIN!!!
(Please see my feedback)
When ordered, you must "EMAIL" me
with both your transceiver and linear information!
OR...
Connector information and a wiring diagram,
so I may install the correct cable connectors.
For over 60 years I've had a personal motto,
"THE BEST IN THE WORLD IS BARELY GOOD ENOUGH"
What I create for others must meet that criteria!
Extra heavy duty commercial and military construction for extreme operation!
Read construction details below.
These cables are custom built to your Specific Needs.
When I have your transceiver and linear amplifier
information, I will custom design your cable,
email you the design criteria to insure we both agree
that the design will do exactly what you wish,
and then build that specific cable to meet your needs.
The picture shown is for the
Yaesu FT-950, FT-450, FT-DX1200 to Tokyo HY-Power linear.
However, your cable with its needed connectors is
what will be constructed and shipped.
cable combinations requiring
DIN / MINI DIN to DIN / MINI DIN connectors, RJ-45, RCA connectors
and any other cables & plugs can be accommodated).
(I can provide this same design and cable construction of
ALL DIN / MINI-DIN / RJ-45 / RCA plugs to interface
from most any transceiver
to most any linear amplifier as needed.)
This cable is professionally assembled under a high powered stereo viewing system,
using required connectors, molded RCA cables
and multi-wire cable, both about 6 to 7 feet long.
The connectors are assembled with
heat shrink tubing over each soldered pin.
Then a second layer of heat shrink is added over the complete pin assembly
to further isolate the contact pin assembly from the shield.
A third layer of heat shrink tubing is added to create strain relief for the cable.
Now the shell is assembled and two more layers of heat shrink tubing are added to
the shell/cable interface to further create axial, radial and linear strain relief
for the cable, anticipating heavy use for remote or field day operation.
The RCA ends now get labels, one with a "LIN-KEY" label and one with an "ALC" label
to insure ease of connecting to the proper jacks on the linear amplifier.
All labels are protected with clear heat shrink tubing.
The Band-Control connector end is assembled in the same way.
This cable is now industrially rated and protected from heavy use.
All my cables are made this way.
As with all Mini DINs and DINs, they must be aligned and inserted carefully.
Be sure to line it up properly before pushing it fully home.
See my EBAY store for
Now Shipping Worldwide!
We will ship WorldWide at slight additional cost.
Also available at separate listings in my EBAY STORES...
http://www.ebaystores.com/id=13270308
DataCharts, (operational information), in both SMALL and LARGE sizes.
ALL AVAILABLE ON EBAY!
ALL SMALL DATACHARTS ARE PRINTED ON BOTH SIDES!
Every SMALL DataChart is also available in an EXTRA LARGE size, laminated, at 11" by 17".
All information that is printed on both sides of the smaller DataChart is now
printed on one large single side, with Heavy Photo Paper Stock and laminated.
Use it as a PLACE MAT in front of the rig for instantaneous operational reference,
or hang it on the Hamshack wall to proudly display your rig as a WORK-OF-ART.
The extra large DataCharts, when ordered from my separate Ebay Stores sites,
are normally printed on one side for instant informational use in front of the rig.
***The large DataChart, (only), can also be printed, by email request only,
on both sides for larger, easier to read print and for those of us with tired eyes.
You must email me if, large DataChart, 2 sided detail
is desired when ordering the extra large DataCharts.
Need Cables? We make cables! All kinds of cables!
All MINI-DINs including the Yaesu 10-pin, DIN, DB9, DB15, DB24, RJ-45,
8-PIN-MIKE, XLR, BNC, RCA, PHONO, MINI-PHONO, MOLEX, ETC.
and most any combination you might need to operate
Various peripheral equipment and linears such as,
Ameritron,
All cables made to highest industrial standards.
Many of our cables are now listed on Ebay.
Our cables, wherever possible, use only
stranded wire and multiple layers of
shrink tubing for fracture resistance.
If you don't see what you need, email me.
We will research your special cable
and get you the information.