This transformer will allow your Japanese device to run on Australian Power.   It changes 240 volts down to 100 volts.

 This Trasformer supports Japanese devices up to 300 Watts.

 Part Number SD100-300

 

Protect your Japanese appliance buy a step down that is guaranteed safe:

This model is fully isolated (insulated input to output) through a double wound design and is the only model that provides additional protection for your appliance against voltage spikes in the power supply, as well as helping filter the audio quality for amplifier type equipment.

 

• Our transformers are made to the highest quality standards
• All voltage converters come with a 1 Year Money Back Warranty
• Designed to protect your device
• Unlike others, our voltage converters are designed to run continuously 24/7
• Quality casing & included Safety Fuse protection
• This new range is lighter & more compact
• Safety fuse protection (50W and above)
• Strong carry handle, enclosed and strong metal construction rubber feet (500W and above)
• Thermal overload in the winding of the transformer
• Thermally tested to Australian Standard AS/NZS61558
•  
• Model Comparison table:

Part Number	Watts	Output Amps	Dimensions (L X W X H)	Weight	Outlets	Handle
SD100--50	50W	0.5A	134mm x 92mm x 71mm	1.5kg	1	no
SD100-100	100W	1.0A	168mm x 158mm x 91mm	3.5kg	1	no
SD100-300	300W	3.0A	176mm x 159mm x 105mm	4.5kg	1	no
				7kg	1	yes
SD100-1000	1000W	10.0A	230mm x 182mm x 130mm	10kg	2	yes
SD100-1500	1500W	15.0A	300mm x 230mm x 180mm	16kg	2	yes
SD100-2000	2000W	20.0A	300mm x 230mm x 180mm	16kg	2	yes

Note: For industrial use and additional safety requirements we recommend our fully isolated step downs 

If you are unsure about what stepdown you will need please check these frequently asked questions:

Power rating

When decided on which Transformer will be suitable for your appliance/s, it is important to consider the Power Rating of the device/s you wish to run on the Transformer.

To determine the Power Rating of your appliance/s, you must determine the total wattage (W) or total ampere (A). This will be presented on the product in a electrical specification label, or in the product manual.

Once the total wattage (W) or total ampere (A) is determined, please use our ‘Calculator’ located on the tab section of this page. This calculator will help guide you on which Transformer is recommended using your appliance/s details.

Always note that the Transformer must always be 20-25% higher in wattage (W) rating than the total wattage of your appliance/s.

E.g: Playstation 3 uses 380 Watts, so you will need the 500 watt rated Step Down transformer

If still unsure please message us  to work out which stepdown transformer you will need.

Important note: Why you should not use a USA stepdown for Japanese appliances:Contrary to advice from others - running your Japanese device on a USA rated stepdown transformer will eventually destroy your Japanese device! Most Japanese equipment runs at 100v and by using Japanese appliance on a 110/120v you will encounter overvoltage. Read more about this