Includes 1/2 fl oz of Hardener

• The DuraCoat System is the very latest in firearm finishing technology. No other commercially manufactured and packaged firearm finishing system offers the versatility, durability and user friendly characteristics of DuraCoat.
• DuraCoat can be applied to ferrous metals, alloys, stainless steel, synthetics, wood, etc, etc. No preheating or baking is required.
• DuraCoat comes in over 200 standard colors plus Clear and can be blended to match any color of the spectrum. Packaged in matte and semi-gloss sheens. DuraCoat can be blended to any sheen level, and applied in a multitude of textures.
• DuraCoat is available in an ever growing line of CamoPaks with a variety of Peel 'N Spray Camo Templates providing a complete firearms camouflage system.
• Duracoat is also available in four turnkey finishing kits designed to meet the needs of all levels of firearms finishers, from beginners to high volume gunsmiths.
• DuraCoat is supported by a battery of finishing equipment, coatings, and solutions.

Usage Information

• Minimum temperature to apply is 65 degrees Fahrenheit.
• Generally you need only wait overnight, or 1 hour if baked at 110 degrees F, to reassemble and fire you weapon. Most abrasive solvents, cleaners, and lubricants can also be used at this point. Full cure time for DuraCoat is four to six weeks.
• DuraCoat colors can be mixed with each other to match any color in the Spectrum.
• When using multiple colors, such as camouflage patterns, DuraCoat Clear will even out the sheen, or reflection differences between colors, giving your surface an even, finished appearance.
• The ideal mixing ratio of DuraCoat to DuraCoat Hardener is 12 parts DuraCoat to 1 part Hardener. You can make your finish glossier or shinier by adding a little more Hardener, up to 10:1. You can make the finish duller, or more matte by using less Hardener, down to 14:1. Any greater or lesser ratio of Hardener may negatively affect durability.
• DuraCoat can be applied in a multitude of textures, with dry film thickness from .25 mils to 1.5 mils. You may add more on high-wear areas where tolerance is not an issue. The thicker and heavier you spray, the shinier your finish will become.
• To remove any adhesive that remains when you peel off your stencil, user mineral spirits and a clean rag. Mineral spirits will not remove the newly applied DuraCoat, but will dissolve the stencil adhesive.