Package:

1 x PID Digital Temperature Controller

Main functions: 

Input

1. Default set: K type thermocouple (TC)(M6 Thread), can be set to K,E,PT100 input.

Output: 

Relay and SSR for your choice

Accuracy

              1. Measuring accuracy: ±0.5%FS

                        2. Cold-end compensation tolerance: ±2℃（can be modified by software in 0~50℃）

                        3. Resolution: 14 bit

                        4. Sampling cycle: 0.5 Sec

Display

                        1.Process value (PV), Setting value (SV) 

                        2. Output, alarm and self-tuning can be indicated by: LED

Control method

                        1. PIN control (including ON/OFF, step-type PID and continuous PID)

                        2. Self-tuning control

Controlling output

                        1. Relay output: contact capacity 250V AC 3A (resistive load) (Refrigeration) 

                        2. SSR output: 12V

                        3. Alarm function output: 1 way

                        4. Contact capacity of output: 250V AC 3A (resistive load)

Setting range 

                        1. Setting value (SV): identical to measuring range (PV)

                        2. Proportional band (P): 0~full range (ON/OFF control when set to 0)

                        3. Integral time (I): 0~3600 sec (No integral action when set to 0)

                        4. Derivative time (D): 0~3600 sec (No derivative action when set to 0)

                        5. Heat-reset proportional cycle: 1~100 sec 

                        6. Detective temperature range：0 to 400℃

        

Mis

                       1. Insulation resistance: >50M ohm(500V DC)

                       2. Insulation resistance: 1500V AC/min

                       3. Power Consumption: 10 VA

                       4. Service environment: 0~50℃, environment with no corrosive gas 30~85% RH

Caution:

              Only clean the instrument when power off

                        Please use a soft cloth or cotton paper to clean up the stain on the display

                        Do not clean up or touch the display by hard matters in case of any scratch

                        Never use sharp & hard matters such ass screwdrivers or ball pan to touch the buttons on the panel, in case of                           any scratch or damage.