The Behringer XENYX Q1202USB is a 12-input, 2-bus mixer that features four XENYX microphone preamps, "one-knob" mono compressors and 3-band EQs. The XENYX Q1202USB also features a built-in USB/audio interface. This mixer can handle a live gig as well as serve as your audio interface for recording.
The high-headroom XENYX mic preamps offer 130dB of dynamic range with a bandwidth that extends from 10Hz to 200kHz. The "one-knob" compressors come standard on all four mono channels. Additionally, the mono channels also have 3-band EQ with a low band at 80Hz, mid at 2.5kHz, high at 12kHz, as well as a low-cut filter.
The built-in stereo USB audio interface allows you to directly connect your Mac or PC. Any signal source connected to the mixer can be recorded straight to your hard drive. Additionally, with purchase, Behringer's website provides free downloads of Audacity, Podifier, Juice, Podnova and Golden Ear. All of this software collectively includes more than 100 virtual instruments and 50 FX plug-ins; turning your computer into a complete home-based or mobile recording studio.
Key Features
Technical Specifications
[Basic Specifications]
Total # Of Inputs
12
Channels
4 mono
4 stereo
USB Audio
Type B connector
2 channels in / 2 channels out
48 kHz sample rate
Busses
Stereo mix buss, mono FX buss
[Microphone Inputs]
Type
XLR connector, balanced, discrete input circuit
Mic Preamps
4 x XENYX preamp
Equivalent Input Noise
-134 dB / -136 dB A-weighted @ 0Ω source resistance
-131 dB / -133 dB A-weighted @ 50Ω source resistance
-129 dB / -131 dB A-weighted @ 150Ω source resistance
Frequency Response
< 10 Hz to 150 kHz (-1 dB)
< 10 Hz to 200 kHz (-3 dB)
Gain Range
+10 to +60 dB
Maximum Input Level
+12 dBu @ +10 dB Gain
Impedance
1.9kΩ
Signal-to-Noise Ratio
110 dB A-weighted (0 dBu In @ +22 dB gain)
THD + N
0.005% / 0.004% A-weighted
Phantom Power Supply
+48V
[Line Inputs]
Type
1/4" TRS connector, balanced
Impedance
20kΩ, 10kΩ unbalanced
Gain Range
-10 to +40 dB
Maximum Input Level
+22 dBu @ 0 dB gain
[Stereo Inputs]
Type
Dual 1/4" TRS connectors, balanced
Impedance
20kΩ, 10kΩ unbalanced
Gain Range
-20 to +20 dB
Maximum Input Level
+22 dBu
[Tape/Media]
Type
Dual RCA connectors
Input Impedance
18kΩ
Maximum Input Level
+22 dBu
Output Impedance
1kΩ
Maximum Output Level
+22 dBu
[Main Outputs]
Type
1/4" TRS connector, balanced
Impedance
120Ω balanced
Maximum Output Level
+22 dBu
[Control Room Outputs]
Type
1/4" TRS connector, balanced
Impedance
approx. 120Ω
Maximum Output Level
+22 dBu
[Headphone Output]
Type
1/4" TRS stereo connector, unbalanced
Maximum Output Level
+21 dBu / 150Ω (+25 dBm)
[Performance]
Compressor
Independent compressor on each mono channel
Metering
4-LED per side
Faders
1 x 60 mm master fader
Noise
Main mix @ -∞, channel fader @ -∞ -106 dB / -109 dB A-weighted
Main mix @ 0 dB, channel fader @ -∞ -93 dB / -96 dB A-weighted
Main mix @ 0 dB, channel fader @ 0 dB -84 dB / -87 dB A-weighted
Aux Sends
1/4" TRS connector, balanced
Impedance: 120Ω
Maximum output level: +22 dBu
EQ Controls
3-band EQ on mono channels:
Low: ±15 dB @ 80 Hz
Mid: ±15 dB @ 2.5 kHz
High: ±15 dB @ 12 kHz
[General]
Power Consumption
20W
Dimensions (W x D x H)
9.8 x 9.8 x 2.0" (250 x 248 x 50 mm)
Weight
3.3 lb (1.5 kg)