These connectors are very popular on Honda engines. These are used on the B/D/H/F and K-Series engines. Here is a list of some the most common uses.

  B/D/H/F Series: ECT, IAT, IAC, Fan Switch, and Knock Sensor -  K-Series: VTEC Pressure -  J-Series: ECT, IAT, Fan Switch

Please compare this connector to what you have before purchasing.

There are other connectors used for the same applications for different models and years.

Check out my Powersport Related items!

What you will recieve Includes

1 x 2  pin housing

1 x retainer

1 x seal

3 x female terminals for 16 - 22 gauge wire (terminals need to be crimped or soldered)

A crimp tool that will work well for these can be found here http://www.ebay.com/itm/251801499519?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Assembly of this set requires you to:

1 - run the wire through the seal

2 - crimp or solder the terminal to the wiring

3 - insert the terminal into the back of the housing

4 install the white retainer and push the green seal into the back side