Visit our ebay Shop to find more interesting products.
We distribute products from A to Z on the Internet. As we work more cost-effective than the sales in the traditional retail, we can deliver quality products at a good price. A professional, competent advice you get by phone or email. Our sales department will be happy to answer your questions. Contact details can be found in the item description.
And the best of all, your goods will be delivered directly to your home. You not only save a lot of money, you also save a lot of time.
We offer:
Great quality - low prices!
Please note that if the permissible length or weight is exceeded, pump motor and pump will be delivered separately. These must be expertly installed on site according to instructions.
Robust, stable high quality deep well pump made from stainless steel for extremely deep boreholes (from ca. 25m to ca. 100m). With this robust deep well pump, delivery of water from extremely deep wells, fountains and water reservoirs for instance is not a problem.
It achieves this with high pressure on the delivery point. Due to its special construction, this pump significantly delivers more water than similar pumps with the same consumption of electrical energy. We therefore genuinely refer to this pump as ENERGY SAVING PUMP!
Despite low electric power consumption of only 250/550/750W/1100W/1500W, a high hydraulic output is provided.
Less electricity is used there*IN THE LONG RUN* you *SAVE MONEY*!
SELECTION 1: 3" BOREHOLE-STAR 250 Pump with 15m Cable
Output: 250 Watt; max. lifting height (Hmax.): 41m; max. flow rate (Qmax.): 3700l/h; max. pressure: 4,1bar; diameter: 76mm; cable length ca. 10mm
SELECTION 2: 3" BOREHOLE-STAR 550 Pump with 15m Cable
Output: 550 Watt; max. lifting height (Hmax.) 53m; max. flow rate (Qmax.): 3300l/h; diameter: 76mm; cable length ca. 10mm
SELECTION 3: 3" BOREHOLE-STAR 750 Pump with 15m Cable
Output: 750 Watt; max. lifting height (Hmax.) 83m; max. flow rate (Qmax.) 4200l/h; max. pressure: 8,3bar; diameter: 76mm; cable length ca. 10mm
SELECTION 4: 3" BOREHOLE-STAR 1100 Pump with 15m Cable
Output: 1100 Watt, max. lifting height (Hmax.): 114m; max. flow rate (Qmax.): 4500 l/h; max. pressure: 11.4bar; diameter: 76mm; cable length ca. 10mm
SELECTION 5: 4" BOREHOLE-STAR 370 Pump with 15m Cable (flat cable)
Output: 750 Watt; max. lifting height (Hmax.): 32m; max. flow rate (Qmax.): 3600l/h; max. pressure: 3.2bar;
SELECTION 6: 4" BOREHOLE-STAR 550 Pump with 15m Cable (flat cable)
Output: 550 Watt; max. lifting height (Hmax.): 54m; max. flow rate (Qmax.): 4200l/h; max. pressure: 5.4 bar;
SELECTION 7: 4" BOREHOLE-STAR 750 Pump with 15m Cable (flat cable)
Output: 750 Watt; max. lifting height (Hmax.): 59m; max. flow rate (Qmax.): 7300l/h; max. pressure: 5.9bar; diameter: 96mm.
SELECTION 8: 4" BOREHOLE-STAR 1500 Pump with 15m Cable (flat cable)
Output: 1500 Watt; max. lifting height (Hmax.): 80m; max. flow rate (Qmax.): 1100l/h; max. pressure: 8bar; diameter: 96mm.
SELECTION 9: 4" BOREHOLE-STAR 1500 Pump with 15m Cable (flat cable)
Output: 1500 Watt; max. lifting height (Hmax.): 80m; max. flow rate (Qmax.): 1100l/h; max. pressure: 8bar; diameter: 97mm.
SELECTION 10: 5" BOREHOLE-STAR 1500-4 Pump with 15m Cable
Output: 1500 Watt; max. lifting height (Hmax.): 62m; max. flow rate (Qmax.): 13,500l/h; max. pressure: 6.2bar;
SELECTION 11: 6" BOREHOLE-STAR 3000-4 Pump with 15m Cable
Output: 3000 Watt; max. lifting height (Hmax.): 78m; max. flow rate (Qmax.): 18,000l/h; max. pressure: 7.8bar;
The flow controller switches the connected pump on and off when needed. This provides the consumer with water. If the consumer is closed, the flow is reduced and the pump is then switched off. The inbuilt dry run protection makes this flow monitor special. If there is no water available after switching on the pump, (cistern empty) the flow switch automatically switches off the pump (dry run protection).
Selecting the right switching device for the pump depends on the intended use of the pump.
Each flow monitor is provided with a cartridge filter! As a result, problems which are due to water pollution can be significantly reduced.
SELECTION 15: Italian made FLUOMAC Automatic Controller (wired) with cartridge filter
We absolutely recommend the FLUOMAC. Flow controller FLUOMAC has a built-in dry running protection. If there is no water available after switching on the pump (empty cistern), the flow controller will automatically switch off the pump (dry run protection). A check valve is also integrated into the flow controller. This prevents the emptying of pipe systems on the consumer side. The pressure gauge monitors the switch on pressure and the pressure in the system.The switching device is not suitable for pumps having a pressure significantly below 1.5bar.
SELECTION 16: TEEPRES® Automatic Controller (wired), with cartridge filter
NEW! MADE IN EU! Intelligent PUMP CONTROL TEEPRES® - with LEAK MONITORING and EMERGENCY SHUTDOWN. Ideal for centrifugal pumps, well pumps, submersible pumps, borehole pumps and jet pumps! Wired and ready to plug in booster pumps with check valve and gauge display. It has a connection for 2 pressure lines!
SELECTION 17: PRESFLO® Flow Monitor Automatic Controller(wired), with cartridge filter
NEW! MADE IN EU! Intelligent PUMP CONTROL PRESFLO® - for automatic switching on of the pump (if necessary), integrated mini-pressure tank, dry run protection and leak monitoring, with inbuilt check valve and manometer (not pressure regulator). Through special protective coating of electronics the flow monitor PRESFLO® can be used in manholes of the tank or pump shafts. Installation instructions should be observed.
SELECTION 18: STEADYPRES® 8.5Amp M/M - Automatic Pump Controller Inverter (unwired), with cartridge filters
NEW! MADE IN EU! To reduce energy consumption when changing pump performance (supplying of toilets, wash machines, lawn sprinkler system) up to 85%, we recommend the use of STEADYPRES® 8.5Amp M/M - Automatic Pump Controller Inverter with intelligent self monitoring functions. STEADYPRES® with integrated dry run protection and an adjustable Auto-Start ensures constant pressure in the water cycle, avoids dangerous pressure surges, overclocking and overheating of the pump. In addition, pump life is significantly increased while the noise is distinctly reduced.
You should consider the following:
1)How deep is my well/borehole?