The code set of correspondence:
Step 1. Connection with the driver, press the middle button before the energy.
Step 2.ligar, may be the next step when the brightness of the output of the load is 50%.
Step 3. Alternately press the "power on" button and "means" button quickly
Until the end of the load for 5%, then press the "power on" button within 5 seconds.
The corresponding code to be successful.
Specification
RF wireless touch panel LED dimmer 25A 12 V
Working temperature: - 20 to 60 degrees.
Operating voltage: DC12V ~ 24 V
Rated current: 25A * 1 channels.
Frequency.433.9 MHz
The size of the remote control:L113 * W55 (mm)
The size of the controller.:L127 * w41 * H32 (mm)
Net weight:250g
Gross weight:340g
Output current:< 25A (1 channel)
Nominal power:12 V, 24 V < < 300 W and 600 W
3 modes in total.
Mode 1: static 100% light, brightness is adjustable, speed is not adjustable)
Flash mode: 2 (the speed is adjustable, the luster is not adjustable)
Mode 3: disappear (velocidadeé brilhonão is adjustable, adjustable)
Lamp does not light after the energy
Possible cause 1
Power cable is not properly connected, or there is no switching output of the power source
Solution 1
Connect the power cable correctly or repeat the power
Possible cause 2
Power cable of the lamp is not connected or a short circuit
Solution 2
Connected power cable lighting
Package includes:
1 piece LED single color controller 12 V and 24 V 25A
1 piece touch panel LED dimmer remote 12 V ( A battery don\`t include)
|