Visit our ebay Shop to find more interesting products.
We distribute products from A to Z on the Internet. As we work more cost-effective than the sales in the traditional retail, we can deliver quality products at a good price. A professional, competent advice you get by phone or email. Our sales department will be happy to answer your questions. Contact details can be found in the item description.
And the best of all, your goods will be delivered directly to your home. You not only save a lot of money, you also save a lot of time.
We offer:
Please note that if the permissible length or weight is exceeded, pump motor and pump will be delivered separately. These must be expertly installed on site according to instructions.
These robust, stable deep well pumps in high quality craftsmanship for deep boreholes are made from stainless steel. With these robust borehole pumps, delivery of water from extremely deep wells, boreholes, water reservoirs is not a problem. A borehole pump is preferred to a booster pump as it is more effective and more energy-saving. Moreover, there are no problems with suction line and noise emmission. Our borehole pumps are frost-proof and need not be protected against frost in winter.
These borehole pumps deliver water at the same high pressure. Thanks to their design, our borehole pumps significantly deliver more water than other pumps with similar consumption of electric energy. We therefore genuinely refer to these as ENERGAY-SAVING PUMPS!
With our pumps you SAVE MONEY and ELECTRICITY in the long run!
2.5"- Borehole Pump BOREHOLE-STAR 250-5 (Power 250 Watt; Max. discharge head (Hmax.) 47m; Max. flow rate (Qmax.) 2400l/h; Diameter 66mm)
2.5"- Borehole Pump BOREHOLE-STAR 550-5 (Power 550 Watt; Max. discharge head (Hmax.) 85m; Max. flow rate (Qmax.) 2400l/h; Diameter 66mm)
3"- Borehole Pump BOREHOLE-STAR 750-5 (Power 750 Watt; Max. discharge head (Hmax.) 62m; Max. flow rate (Qmax.) 5400l/h; Diameter 75mm)
Flow Monitor FLUOMAC - Automatic-Controller, Wired
We recommend the use of AC10 in combination with the above-mentioned borehole pumps if the installed switching device is frost and poisture-proof. In this combination, several 1000 piece pumps have been in use for several years. The pump control automatically turns the pump on and off as needed. The flow controller has an in-built dry running protection. If there is no water available after switching on the pump (empty cistern), the flow controller will automatically switch off the pump (dry run protection). A check valve is also integrated into the flow controller. This prevents the emptying of pipe systems on the consumer side. The pressure gauge monitors the switch-on pressure and the pressure in the system. The switching device is not suitable for pumps having a pressure significantly below 1.5 bar.
AQUA-3 Automatic-Controller, Wired
The flow controller AC 3 is only recommended in combination with the BOREHOLE-STAR 750-5. It automates and controls the switching on of the pump. It monitors the pressure in the pipe system from the pump to the consumer. When water is removed from the pipe system, pressure decreases. If the pressure drops below 1.5 bar, the flow monitor switches on the connected device (e.g. centrifugal pump). This provides the consumer with water again. If the consumer closes a tap for instance, water flow reduces and the pump is switched off. This special feature of this flow monitor is the built-in dry-running protection. The pressure gauge displays the pump pressure and is good for monitoring the system.
Flow Monitor TEEPRES® - Automatic-Controller, Wired
MADE IN EU! Intelligent PUMP CONTROL TEEPRES®- WITH DRY-RUN PROTECTION, LEAK DETECTION and EMERGENCY SHUTDOWN. Suitable for several CENTRIFUGAL PUMPS, SUBMERSIBLE PUMPS, BOREHOLE PUMPS, BOOSTER PUMPS and SUBMERSIBLE PRESSURE PUMPS. Wired and ready to plug-in as HOUSE WATER SYSTEM with check valve and pressure gauge display. With connection for 2 pressure lines directly to the device!
Flow Monitor PRESFLO® - Automatic-Controller, verkabelt
NEW! EU manufactured QUALITY! Intelligent PUMP CONTROL PRESFLO®- for automatic switching on of the pump (if needed), integrated mini-pressure tank, dry-run protection and leak monitoring with built-in check valve and pressure gauge (no pressure regulator). Due to special protective coating of electronics, the flow montior PRESFLO® can be used in cisterns/pump shafts. Installation instructions must always be observed. The status display shows when the pump is running, which is particularly important for borehole pumps.
Should something not work to your satisfaction, please do not just simply leave a bad eBay feedback. Write to us and we will solve the problem together! So you is more helpful and us too! We strive constantly to improve the quality and service. Help us! Let us deal fairly with each other!
We ship our products directly from the main camp to our customers. So that we can provide the speedy delivery of the goods (after receipt) on favorable terms certainly.
Our Conditions, Cancellation and return rights, can be found on our -site or below on the supply side.
The instructions can be found in our Shop.