Made for guitar instruments, and effects pedals of all kinds where an unbalanced mono 1/4" 6.35mm male jack is required.
The Klotz Rean lead is a screened type which is always necessary when going from an instrument to an input etc at mic or line levels. This lead not only has one screen but two, a very high purity grade spiral copper screen and a conductive plastic screen.
The cable is flexible, hard-wearing, and comes in Black, Red, and Blue. Made with Klotz AC104 unbalanced Pro Audio Cable and Neutrik Rean 1/4" (6.35mm) Jacks in nickel colour.
This lead is handmade to order by us. We make the lead-to-order and is custom-made. We have many decades of experience in the pro audio industry. We make this lead using 4 percent silver solder.
Important - how we measure this lead:
Measurement is what you would see - visible cable length, this is from the rear of the jack, the boot as it is called.
Rean is a brand owned by Neutrik
Note this lead is not intended to go from a low-impedance speaker output (Speaker Out) on an amplifier to a passive speaker. If you require a 'Speaker Lead' please check out our eBay shop, we have many types to choose from. If you are not sure please contact us through eBay messages - we usually reply very quickly.
Specification AC104 Pro Audio Cable
The Klotz AC104 'Pro Audio Cable' with high-grade copper spiral and inner conductive plastic shield creates the dual screen within the cable so less noise is evident over standard spiral copper screened cables. It is a branded cable and is made in Germany
Shielding (Screen):
Conductor-stranded bare copper, 7 x 0.20 mm
Cross Section 0.22 mm²
Insulation PE
1. Shield conductive plastic layer
2. Shield bare copper spiral shield
Outer Jacket
Overall Diameter PVC, matt
6.1 mm
Min. Bending Radius 30 mm
Working Temperature -20 °C / +70 °C
Conductor Resistance < 85 Ω/km
Capacitance 115 pF/m
Insulation Resistance > 1 GΩ x km
Weight 45 g/m
NYS224C-0 Rean Jack Plug Specification
Connector: NYS224C-0
Connection Type: Plug Gender male
Electrical
Dielectric strength 0.5 kVdc
Insulation resistance≥ 1 GΩ Contact resistance depends on the mating connector Rated current depends on the mating connector
Material
Contact plating Nickel Contacts Brass (CuZn39Pb3)
Shell Zinc diecast (ZnAl4Cu1)
Shell plating Nickel Insulation
Thermoplastic Strain relief Crimp type SnCe plated
Environmental
Solder-ability Complies with IEC 68-2-20Temperature range-20 °C to +70 °C
We sell many other leads in our eBay shop
Please read Terms and conditions of the sale - Buying this item(s) means you accept these terms