Digital High-Pressure Air Pump without Battery.
Inflate boats, kayaks and rafts in minutes. Never use hand pump again! Inflates and deflates. Highly Recommended!
Our Deluxe High-Pressure Digital Air
Pumps are a incredible dual action, automatic, 12 volt pump developed
in Australia. Designed to blowup inflatable boats, rafts, kayaks and
iSUP boards with no effort at all. Just set the pressure gauge and
press the ON Button. The pump will then inflate your boat to its
correct pressure and stop automatically.
Digital Electric Air Pumps are perfect product for:
- Inflatable boats.
- Inflatable rafts.
- Inflatable kayaks.
- Drop-stitch high-pressure air floors.
- Inflatable stand up paddle boards.
- Inflatable fenders, and many more inflatable products.
Digital Electric High Pressure Pump include:
- High-Speed fan pump and High-Pressure piston pump.
- Digital Gauge to display current air pressure readings in KPA/PSI.
- Automatic Stop when chosen pressure is reached.
- Reliable combination of Turbine & Piston to reduce wear.
- All necessary adaptors are included to fit most air valves.
- FREE soft carry bag with storage compartments and carry strap.
- Packing dimensions is 11"x8"x8". Shipping weight is 7 lbs.
Our high-pressure Digital Gauge
inflator pumps are adjustable from 2.2 PSI up to a maximum of 12 PSI.
By delivering around 200 liters/minute, electric pump will inflate a
typical 14' boat in about 8-10 minutes.
These pumps are not only excellent for
quickly inflating boats and rafts, but also great for quickly filling
inflatable high-pressure air deck floors and stand up paddle boards to
up to 10-12psi air pressure. Without a high-pressure electric inflator,
you'd have to use a hand pump for around 15-20 minutes, under the hot
sun, which might not be your idea of fun. With this magic pump, you
will be ready to roll in under 10 minutes with no effort at all.
All high-pressure air pumps now come
equipped with a set of generic plastic adaptors designed to fit most of
air valves on a market and specialized valve adaptor designed to fit
Saturn's Naru valves. Choose correct adaptor that will fit nicely into
air valve, and will press pushpin down when inserted for proper
inflation. After inflation, when adaptor is removed, valve will lock
automatically preventing air from escaping. You don't need any other
valve adaptors besides those that already provided with our electric
air pump. Using any other adaptors beside provided can burn pump pistons and will void its warranty.
How Digital High-Pressure Air Pump Works:
When the pump starts it will be on a
HIGH VOLUME (Turbine) pump until the pressure reaches 2-3 PSI. Then the
pump will automatically switch over to the HIGH PRESSURE (Piston) pump
and inflate the boat to its set pressure. You will hear sound of pump
changing significantly when piston pump kicks in. Once reaching the set
pressure the pump will automatically turn itself off.
Important warnings about digital electric pump:
- DO NOT USE HAND PUMP ADAPTORS WITH HIGH-PRESSURE ELECTRIC PUMP!
- MAKE SURE VALVE PUSHPIN IS PRESSED DOWN WITH EPUMP ADAPTOR.
- DO NOT USE EPUMP WITH ANY OTHER ADAPTORS EXCEPT PROVIDED.
- DO NOT RUN EPUMP ON HIGH PRESSURE FOR LONGER THEN 15 MINUTES.
- DO NOT DROP EPUMP ON HARD SURFACE OR SUBMERGE INTO THE WATER.
- DO NOT LET SAND, DUST OR DEBRIS ENTER INSIDE AIR INTAKE.
- DO NOT ATTACH ADDITIONAL ADAPTORS BETWEEN HOSE AND EPUMP.
- MAKE SURE AIR IS NOT ESCAPING AROUND VALVE ADAPTOR OR HOSE.
- DO NOT OPERATE PUMP IF IT IS HOT. LET IT COOL BEFORE USE.
- DISCONNECT PUMP FROM WALL CHARGER WHEN GREEN LED IS ON.
Instructions for operation for digital electric pump:
AVERAGE AIR PRESSURE FOR INFLATABLES:
- BOAT TUBES: 20KPA (25KPA MAX)
- BOAT KEEL: 30KPA (40KPA MAX)
- BOAT FLOOR: 60KPA (70KPA MAX)
- iSUP BOARD: 70KPA (80KPA)
- Out of the several included valve
adaptors, you will need to find one that fits tightly inside your air
valve. The correct adaptor should have a small perpendicular plastic
piece that goes inside across the tube or will have 2 small tabs. This
perpendicular piece or tabs are designed to press on the pushpin inside
the valve to open valve and allow air to be pumped inside boat
chamber. Try different adaptors to see which one fit better and can
firmly press on pushpin of your air valve.
- Before attaching the hose with the
correct plastic valve adaptor to your Saturn boat Naru valve, please
make sure that the pushpin inside the valve is in the upper, locked
position. Air will not escape from a chamber when the pushpin is in the
upper position.
- Insert the valve adaptor connected to
the electric pump hose into the Naru valve, so that the perpendicular
piece or tabs presses the valve pushpin down, and unlocks the valve by
letting air in. Once the chamber is full to capacity, you will quickly
pull one end of the electric pump hose, and the Naru valve will
automatically lock itself.
- Never inflate air valve that is locked. This will burn pump very quickly and will void warranty.
- Set the proper air pressure in KPAs on
your electric pump dial prior to operating the pump. Make sure that
you do not over inflate the boat chambers. Please note, that
high-pressure air floors withstand much more air pressure then boat
tubes.
- When the boat is deflated, the
high-volume air pump will start quickly filling the chamber up to 80%,
and then the high-pressure pump will kick in to fill the boat to the
setting of the air pressure dial. You will hear more louder noise once
high pressure piston pump will start working. That is normal. The pump
should stop automatically once the correct air pressure is reached.
Troubleshooting & Frequently Asked Questions (FAQ):
I hear rumbling noises and small parts rocking inside the pump?
- Do not drop pump, there are plastic
parts inside that can break. Do not overheat piston pump by trying to
fill closed valves, running longer then 15 minutes or using small air
output adaptors. Piston pump parts can break if overheated. If pump
still within warranty period, send it back for replacement.
How do I know if pump with built-in internal battery has been fully charged?
- Once EPUMP_DB model of pump is fully
charged, LED light on wall charger should turn from red to green. Make
sure you re-charge pump after each 3-4 inflation cycles of medium/large
size boat. Do NOT overcharge pump. Promptly disconnect EPUMP_DB from
wall charger when it fully charged. Overcharging may damage electronic
unit of this pump.
Yellow hose connected to air output of pump become hot and let air escape.
- If pump running too long, piston
mechanism get overheated and heat up hose too. Apply Teflon tape
between hose and output or use metal clamp to secure it to the black
output tube.
Electric pump was stored in my car and now does not turn on. Why?
- Electric pump has temperature sensor
built in and will not turn on if was stored in a hot car. Please allow
deluxe pump to cool off in a shade or by holding it against car air
conditioning vent for couple minutes.
Pump switching to HP mode immediately after powering on. Why?
- Make sure that valve is locked, with
pushpin in an upper position. Also, make sure you are using correct
valve adaptor. Provided specialized valve adaptor should press on
pushpin inside the valve and open it to let air in. As soon as you
remove that adaptor, valve will automatically lock itself, preventing
air from escaping.
Do I have to remove pump from a pouch to turn it ON every time?
- Power button for new and latest design
electric pumps are now moved to the bottom of housing, closer to the
battery. That was done in order to increase pump reliability. However,
it is not really necessary to remove pump all way from a pouch in order
to turn button on or off. All you need to do, is to locate power
button through the fabric of soft pouch, and press on it without taking
pump out. For easier identification of power button, you can simply
mark location of power button under the fabric with a permanent felt
pen marker.
How to use specialized valve adaptor with Naru valves?
- Specialized Deluxe Electric valve
adaptor comes with 2 silicone rubber seals. For better fit into Naru
valve, place thick seal with grove inside and thin seal with grove
outside as shown on below pictures:
-