This motor is in the Arrow Handicraft Ball Clock, Arrow Domino Clock, Arrow Coin Clock, (some) Kit Cat Klocks, (some) Olympia Beer Signs, (some) Jefferson Golden Hour Mystery Clocks, (some) Sankyo Digital Clocks, (some) European Roll-O-Clocks, Pool, Hot Tub, & Spa Timers, and many other items.
A little info about me:
I have a tremendous amount of first-hand experience repairing these motors.
I will be here to help you with any questions you have before, during, and after, you install these gears.
I've also completely refurbished a lot of Arrow Ball Clocks - and can help you with any questions you have about them.
Simply use the "Contact Seller" on the right. I am usually able to respond very quickly.
You can see videos of some of the Arrow Ball Clocks that I've refurbished recently on my YouTube channel.
There is one gear inside the motor of all of these clocks that has disintegrated over time. The type of material it was made from in 1978 breaks down with age. It weakens and simply falls apart: Whether it was used or not. All of those original gears will fail at some point in time, and the motor will not work.
I have the gears you need to replace that faulty gear. These are brand new gears; made from updated, modern materials. I will send you both of the gears that are under the motor cover (see pictures). These motors will work like new with these brand new gears.
Important Note: My gears are brand new. They were made within the last 6 months. They are not 20-30 year old gears out of 20-30 year old motors.
You may find comfort in knowing that replacing these gears is absolutely the #1 fix for the, "My Motor Does Not Run" issue. I want to use the words, "These will fix almost all of them," but there could be a couple other reasons it does not run.
That is why you are going to Test your motor and all the gears first.
My Motor Repair Video will show you how to Test the gear to see if it's bad, and check to see if everything else in the motor case is okay.
Please watch my Motor Repair Video for:
* Full, detailed instructions.
* How to open your motor cover.
* How to Test your gear to verify you have a bad gear.
* How to replace the bad gear.
* After you have determined that the gears under the motor cover are bad: Please scroll ahead to minute 29:00 in my video to test and make sure all the other gears (the side gears) are good.
To see my repair video:
* If you are using Google or Google Chrome: Do an internet search for "Rick's Arrow Ball Clock Website" and then click on "Intermatic Motor Repair."
* If you are using a search engine other than Google or Google Chrome: Do an internet or YouTube search for "Intermatic Motor Test & Repair." (My website is a Google Sites website, and some of the other search engines and programs will not show it.)
It is a 1 hour, 10 minute long video.
I apologize for how long it is. I tend to be a very detailed person.
Before you order a set of new gears:
* Please test your main gears and make sure that they are indeed bad.
* Please test your side gears (as mentioned above, minute 29:00) to make sure they are all good.
* If you find that any of your side gears are bad (this is rare), please contact me for assistance before you place an order.
* Feel free to contact me with any other questions or concerns.
If you've tested your motor, and these gears do not fix your motor: I will accept a return and refund your money. I am that confident that these gears will fix your motor.
These gears fit Intermatic Motors with the following numbers:
If you have an Intermatic motor that is not on this list: Please contact me with all of your motor's numbers and details. I would enjoy trying to help you get yours working again.
The hyphens and spaces may, or may not, be on your motor. The letters and numbers are all that is important.
WG-1040 WG 1040 WG1040
WG-1420 WG 1420 WG1420
WG-1420-1 WG 1420-1 WG1420-1
WG-1420-2 WG 1420-2 WG1420-2
WG-1420-3 WG 1420-3 WG1420-3
WG-1450 WG 1450 WG1450
WG-1470 WG 1470 WG1470
WG-1640 WG 1640 WG1640
WG-430-3 WG 430-3 WG430-3
WG-500 WG 500 WG500
WG-500-1 WG 500-1 WG500-1
WG-500-2 WG 500-2 WG500-2
WG-500-3 WG 500-3 WG500-3
WG-500-4 WG 500-4 WG500-4
WG-5014 WG 5014 WG5014
WG-5024 WG 5024 WG5024
WG-5024-1 WG 5024-1 WG5024-1
WG-5094 WG 5094 WG5094
WG-5094-1 WG 5094-1 WG5094-1
CM-10 CM 10 CM10
CM-10-1 CM 10-1 CM10-1
CM-10-2 CM 10-2 CM10-2
For all motors not on the list above:
Some motors use a different gear.
* For some Sankyo Intermatic motors such as WG6B9A, WG1B9B, MAFA60ZA1:
* Or, for any other motor that looks similar to my photos, but is not on the list above:
Please contact me for information. Your motor might use a different gear. I have those gears.
I just need some information so I send you the correct gear for your motor.
These motors are used in:
Arrow Handicraft Ball Clock
Arrow Domino Clock
Arrow Coin Clock
Arrow Baseball, Basketball, and Soccer Clocks
Olympia Waterfall Barrel-Head Beer Sign
Olympia Gold (Starburst, and others) Beer Sign
Lone Star (Starburst) Beer Sign
Some Kit Cat Klocks
Some Roll-O-Clock Ball Clocks (European version)
Some Sankyo Digital Clocks
Some Jefferson Golden Hour Mystery Clocks
Some Panasonic Digital Clocks and Clock Radios
Some Zenith Digital Clocks and Clock Radios
Some CB Radio Base Station Clocks (American and European)
Some Kitchen Stove Clocks (American and European)
Pool Timers
Hot Tub / Spa Timers
And Many Other Items
Please understand: You will be receiving only the set of gears. You are not purchasing the entire motor.
Please know:
I ship these in a rigid box. That protects them from damage during shipping.
I will supply you with a tracking number so you can follow them throughout the shipping process.
I usually ship items the same day you order it. I advertise my terms as, "one business day" just in case I am out doing something else that day.
International Shipping:
I gladly ship internationally.
Thank you for looking.
Rick S.