|
A comprehensive range of DC plugs comprising 16 assorted plugs and sizes that cover the vast majority of requirements. The plugs have the standard 2-pin type connection and are supplied in a handy lidded storage box with clear identification. The standard hollow DC tips are described below as; 1st dimension diameter of hole, followed by outside dimension of plug sleeve contact TS = "Telephone-Socket" or "Tip & Sleeve" male jacks CP = Centre Pin type, with the smaller dimension being the diameter of the pin | |||||||
16x standard connectors (sizes in mm): | |||||||
2.5TS | 3.5TS | 1.0/3.0 | 2.1/5.0 | 2.1/5.5 | 2.5/5.0 | 2.5/5.5 | 1.35/3.5 |
1.7/4.0 | 1.75/4.75 | 1.5/5.0 | 1.5/5.5 | 2.8/5.5 | 0.75/2.35 | 3.0/6.3 | 1.0/7.0CP |
for DC or AC voltages typically 3-30v—depending on size used
use as replacement for lost tips,
—or to obtain extra tips for others' adaptors
'standard' Minwa X-type polarity-reversible pin-connections
(two 1.5mm pins set at 4.2mm)
[this pic shows the configuration of these plugs (0.75/2.35mm shown)]
NOTE that these 2-pin adapter-plugs WILL NOT FIT
the 'non-standard' fixed-polarity connectors
which have one pin bigger
= WILL NOT FIT