Long Range Solar Powered Comprehensive Wireless DA600+ 2B Perimeter 4G Alarm System with 900 metre Transmission & 100 metre Detection, supplied with:

4G 2B Perimeter Alarm

A complete Alarm System to help you Monitor & Secure your Perimeter, ideal for DIY Installation.

Receiver:

The Indoor 4 - Channel Wireless Receiver is powered by a standard 3-pin Plug in Transformer and has the following features:

4 Channel receiver

Wireless Beams: 
These impressive 2B Solar Powered Wireless Perimeter Beams (often called laser beams) are packed with impressive features listed below: 
  • Battery Powered with Built in Solar Charging: (making for easy installation).
  • 2 x Dual Detection Technology Beams: (prevents false alarms from small animals and moving debris).
  • 100 metre Detection: (covers more with with less detectors).
  • Impressive 900 metre Wireless Range (this can be doubled by adding a signal repeater): 
  • Quality Build.
  • Supplied with Wall & Pole Mounting Brackets.
  • Test Display & Eye Sights (for help installation).
  • Top up charging Ports.

2B Wireless Perimeter Beams

The Dual Detection Technology works by having a pair of Detectors (set 60 mm apart from each other) on each Beam, both Detectors have to be breached simultaneously to create an activation, allowing small animals, insects, leaves & debris to safely pass by. 

2B Beam Dual Detection

These 2B Beams have two pairs of these Dual Detectors which are located 260 mm apart from each other resulting in two invisible detection Beams set 260 mm apart. 

The External Beams are also supplied with an additional Charging Port which can be used to give the Beams a boost charge should you experience a lengthy duration of low sun light, or perhaps one of the beams needs to be fitted into a slightly covered location. 

It is also possible to add a separate Solar Panel onto any of the Beams if this helps with charging or positioning of the Beams.

Rear of 2B Wireless Perimeter Beams

The Beams also have an optional built in Siren which will activate every time someone walks through the Beams, this can be a great feature when the Beams are being used as safety Beams (protecting dangerous locations) or as simple Visitor Alerts, it can also be turned OFF for when the Beams are being used purely as a Perimeter Intruder Alarm ensuring silence when in use. 

They are very easy to install as there is a Display Screen and Eye Sighting Lens.

You can expand this Perimeter Alarm by adding additional Beams, PIR's, Gate & Door Contacts (please contact us for advice).

Operating Range:

The Wireless operating range between the Perimeter Beams & Receivers is 900 metres (line of sight) which equates to around 400 - 600 metres in nearly all applications (this can also be doubled by using the signal repeater).

4G KP9 Auto-Dialler:

The KP9 4G Auto-Dialler is connected to the Wireless Receiver by a short length of bell cable (supplied) and communicates through mobile phone networks, a nano sized SIM Card needs to be fitted (not supplied as standard but can be added above), you can use either PAYG or Contract (no data is required).

The Dialler operates on 4G networks but also works back on 2G & 3G making it more reliable and is packed full of features including:

The secret to using a 4G Auto-Dialler with a Perimeter Alarm is to use the Dialler as the brains of the system, so if the Dialler is Armed the Alarm is Armed, if Disarmed the Alarm is OFF (although you can choose to use the built in chime on the wireless receiver to give a useful Alert for times when you are at the premises).

The Dialler can be controlled by the following methods:

The GSM Control Panel can also in different ways helping you a return on the investment, examples below:

You can add many additional accessories to this Perimeter Alarm system to suit your application including:

*You can use up to 128 sets of Wireless Detectors with this single Alarm System*

If you require advice when building your system, please contact us for Friendly, No Obligation Advice !!

Compatible with all DA600+ Products !!


Kit Includes:

Specification:

Wireless Receiver Specification:


4G KP9 Dialler Specification:


Beam Specification:


Easy Programming Method of Beams to Receiver:

  1. Turn On Beams (switch on rear).
  2. Mount the Beams.
  3. Line up By Eye, String Line etc.
  4. Put the relevant Receiver into Learn Mode.
  5. Walk through the Beams, at this time (providing you have them correctly lined up), a low red glow will illuminate briefly.
  6. The Signal sent to the Receiver from this set of beams will be learned into the relevant receiver.
  7. Take the Receiver out of learn mode.
  8. The system is now ready.

4G Auto-Dialler Programming:

Ultra Secure Direct are a UK Company, Despatching Goods from the UK (within 1 working Day), the goods include UK VAT, therefore there is No Chance of the Buyer Receiving any unpleasant Import Duty Taxes upon receipt of the Goods.