PLEASE READ THE FULL ADVERT SO YOU KNOW WHAT YOU'RE BUYING. THE LAUFEN VALVE IN THE MAIN IMAGE IS NO LONGER MADE

Please note that this is not a Laufen branded part, this item is made by Geberit FOR Laufen so the part code on the box will differ

Laufen 8.9587.0 REPLACEMENT

Usually found in these popular Laufen toilet cisterns:

Arolla, Design, Form, Gallery, Pro, LB3, Living, Mimo, Mobello, Moderna, Mylife, Object, Palace, Palomba, Radial, Il Bango Alessi, Swing, Universal & Vienna
Brand new REPLACEMENT valve for main image, which is no longer manufactured

Please look at all images for a simple breakdown of installation

CHECK THAT YOUR EXISTING CRADLE IS NOT BROKEN BEFORE BUYING

Simple installation allows you to effortlessly switch over the working parts, without having to unbolt the pan from the cistern. The existing cradle in your cistern will fit the new valve. 

If you cannot turn the water off easily, get someone to hold the float up on the water inlet valve to stop the flow of water into the cistern. Then remove the old valve by locating the 2 tabs (about a quarter of the way up from the bottom) and pushing them with your thumb and index finger to remove.

The new valve is removed from the new cradle with a simple twist. It then pushes and clicks into your old existing cradle and that's it! It really is that easy.

The new valve is adjustable in height allowing for any sized cistern. Once you have the height set the button simply screws in through the top of the cistern lid to secure it.

Of course if you wish to get the cistern off and install from new, this isn't an issue. You get all washers, bolts and even a plastic spanner to fit the valve as a whole new component.