honest-sal
Motorcycle Accessories
- Material: PU (Polyurethane) resin
- Type: Carbon fibre look – not real carbon fibre
- Height : 18.5 cm
- Width (Top) : 11 cm
- Width (Bottom): 8 cm
Installation Guide:
1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.
2. Without peeling, place the pad on the tank, align it and mark with paper tape.
3. Peel and apply the pad.
4. Press the air bubbles out. Use cloth if necessary.
5. Allow 12 hours for the pad to set in. Do not ride straight away.
5. Once it is completely stuck, spray some wax and wipe it clean for a perfect finish.
Note: In extreme cold, carefully use a hair dryer or heat gun to soften up the pad before application.
- Please get in touch if you have any issues or questions.
- Don't just leave negative feedback as it won't solve the problem.
- Your satisfaction is my priority
honest-sal
Motorcycle Accessories
- Material: PU (Polyurethane) resin
- Type: Carbon fibre look – not real carbon fibre
- Height : 18.5 cm
- Width (Top) : 11 cm
- Width (Bottom): 8cm
Installation Guide:
1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.
2. Without peeling, place the pad on the tank, align it and mark with paper tape.
3. Peel and apply the pad.
4. Press the air bubbles out. Use cloth if necessary.
5. Allow 12 hours for the pad to set in. Do not ride straight away.
5. Once it is completely stuck, spray some wax and wipe it clean for a perfect finish.
Note: In extreme cold, carefully use a hair dryer or heat gun to soften up the pad before application.
- Please get in touch if you have any issues or questions.
- Don't just leave negative feedback as it won't solve the problem.
- Your satisfaction is my priority