DESCRIPTION

250x122, 2.13inch E-Ink Display HAT For Raspberry Pi, SPI Interface
2.13″ E-Paper HAT

Partial Refresh Support, Low Power, Wide Viewing Angle, Paper-Like Effect

Ideal for price tags, shelf labels, industrial instruments...

 
  • Size2.13"
  • Resolution250×122
  • Viewing Angle>170°
  • Display ColorBlack and White
  • Grey Scale2
  • CommunicationSPI
  • Display PanelE-paper
  • ExperiencePaper-like
  • EnvironmentAmbient Light Required
  • Display TypePassively Reflective
  • RefreshingPartial Refresh Support
Features At A Glance
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
  • SPI interface, for connecting with controller boards like Arduino/STM32, etc.
  • Onboard voltage translator, compatible with 3.3V / 5V MCUs
  • Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)

Specifications
OPERATING VOLTAGE3.3V/5VGREY SCALE2
INTERFACE3-wire SPI, 4-wire SPIPARTIAL REFRESH TIME0.3s
OUTLINE DIMENSIONS65 × 30.2mmFULL REFRESH TIME2s
DISPLAY SIZE48.55 × 23.71mmREFRESH POWER26.4mW (typ.)
DOT PITCH0.194 × 0.194mmSTANDBY CURRENT<0.01uA (almost none)
RESOLUTION250 × 122 pixelsVIEWING ANGLE>170°
DISPLAY COLORblack, white  


Advantages Of EINK

E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.


Standard Raspberry Pi 40PIN GPIO Header

Compatible With Raspberry Pi Series Boards, Jetson Nano

for reference only, the Raspberry Pi in the picture is NOT included

Onboard SPI Control Interface

For Use With Other Controller Boards Like STM32/Arduino

VCC3.3V/5V
GNDGround
DINSPI MOSI pin
CLKSPI SCK pin
CSSPI chip selection, low active
DCData / Command selection (high for data, low for command)
RSTExternal reset, low active
BUSYBusy status output (high for busy)

Onboard Voltage Translator

Compatible With 3.3V / 5V MCUs


Application Examples

Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...


Outline Dimensions

Product Certification
Resources & Services

* Resources for different product may vary, please check the wiki page to confirm the actually provided resources.

Selection Guide

PART NUMBERCOLORSGREY SCALERESOLUTIONDISPLAY SIZE (MM)OUTLINE DIMENSION (MM)FULL REFRESH TIME (S)PARTIAL REFRESH1PI HEAD-ER2FLEXI-BLEINTERFACE
1.02inch e-Paper Moduleblack, white2128×8021.76 × 14.0042.0 × 27.02√  SPI
1.54inch e-Paper Moduleblack, white2200×20027.60 × 27.6048.0 × 33.02√  SPI
1.54inch e-Paper Module (B)red, black, white2200×20027.60 × 27.6048.0 × 33.014   SPI
1.54inch e-Paper Module (C)yellow, black, white2152×15227.51 × 27.5148.0 × 33.027   SPI
1.64inch e-Paper Module (G)red, yellow, black, white2168×16829.568 × 29.56847 × 3812   SPI
2.13inch e-Paper HATblack, white2250×12248.55 × 23.7065.0 × 30.22√√ SPI
2.13inch e-Paper HAT (B)red, black, white2250×12248.55 × 23.7065.0 × 30.215 √ SPI
2.13inch e-Paper HAT (C)yellow, black, white2212×10448.55 × 23.7065.0 × 30.215 √ SPI
2.13inch e-Paper HAT (D)black, white2212×10448.55 × 23.7059.2 × 29.22√√√SPI
2.13inch e-Paper HAT (G)red, yellow, black, white2250×12248.55 × 23.7065.0 × 30.225 √ SPI
2.13inch Touch e-Paper HATblack, white2250×12248.55 × 23.7069.15 × 38.902√√ SPI
2.13inch Touch e-Paper HAT (with case)black, white2250×12248.55 × 23.7072.20 × 41.902√√ SPI
2.36inch e-Paper Module (G)red, yellow, black, white2296×16852.096 × 29.56869.5 × 38.512   SPI
2.66inch e-Paper Moduleblack, white2296×15230.704 × 60.08837.0 × 83.56√  SPI
2.66inch e-Paper Module (B)red, black, white2296×15230.704 × 60.08837.0 × 83.515   SPI
2.7inch e-Paper HATblack, white4264×17657.29 × 38.1985.0 × 56.06√√ SPI
2.7inch e-Paper HAT (B)red, black, white2264×17657.288 × 38.19273.5 × 56.015 √ SPI
2.9inch e-Paper Moduleblack, white4296×12866.89 × 29.0589.5 × 38.03√  SPI
2.9inch e-Paper Module (B)red, black, white2296×12866.89 × 29.0589.5 × 38.015   SPI
2.9inch e-Paper Module (C)yellow, black, white2296×12866.89 × 29.0589.5 × 38.015   SPI
2.9inch e-Paper HAT (D)black, white2296×12866.90 × 29.0679.0 × 36.72√√√SPI
2.9inch Touch e-Paper HATblack, white4296×12866.89 × 29.0589.10 × 42.703√√ SPI
3inch e-Paper Module (G)red, yellow, black, white2400×16870.4 × 29.56888.5 × 4112   SPI
3.52inch e-Paper HATblack, white2360×24074.51 × 49.6786.5 × 571.5 √ SPI
3.7inch e-Paper HATblack, white4480×28047.32 × 81.1258.0 × 96.53√√ SPI
4.01inch e-Paper HAT (F)7-Color2640×40086.40 × 54.0098.5 × 70.030 √ SPI
4.2inch e-Paper Moduleblack, white4400×30084.80 × 63.60103.0 × 78.54   SPI
4.2inch e-Paper Module (B)red, black, white2400×30084.80 × 63.60103.0 × 78.515   SPI
4.2inch e-Paper Module (C)yellow, black, white2400×30084.80 × 63.60103.0 × 78.525   SPI
4.3inch e-Paper UART Moduleblack, white4800×60088.00 × 66.00118.0 × 75.01.5   UART
4.37inch e-Paper Module (G)red, yellow, black, white2512×36890.11 × 64.77101.5 × 81.514   SPI
5.65inch e-Paper Module (F)7-Color2600×448114.9 × 85.8138.5 × 100.5<35   SPI
5.83inch e-Paper HATblack, white2648×480119.232 × 88.320125.4 × 99.55 √ SPI
5.83inch e-Paper HAT (B)red, black, white2648×480119.232 × 88.320125.4 × 99.520 √ SPI
6inch e-Paper HATblack, white16800×600122.4 × 90.6138.4 × 101.8<1√√ USB/SPI/
I80
6inch HD e-Paper HATblack, white161448×1072122.4 × 90.6138.4 × 101.8<1√√ USB/SPI/
I80
7.3inch E-Paper HAT (F)7-Color2800×480160 × 96170.2 × 111.235 √ SPI
7.3inch E-Paper HAT (G)red, yellow, black, white2800×480160 × 96170.2 × 111.216 √ SPI
7.5inch e-Paper HATblack, white2800×480163.20 × 97.92170.2 × 111.25 √ SPI
7.5inch HD e-Paper HATblack, white2880×528163.24 × 97.94170.2 × 111.25 √ SPI
7.5inch e-Paper HAT (B)red, black, white2800×480163.20 × 97.92170.2 × 111.226 √ SPI
7.5inch HD e-Paper HAT (B)red, black, white2880×528163.24 × 97.94170.2 × 111.221 √ SPI
7.5inch e-Paper HAT (C)yellow, black, white2640×384163.20 × 97.92170.2 × 111.216 √ SPI
7.8inch e-Paper HATblack, white161872×1404158.18 × 118.64173.8 × 127.6<1√√ USB/SPI/
I80
9.7inch e-Paper HATblack, white161200×825202.8 × 139.43218.8×156.4<1√√ USB/SPI/
I80
10.3inch e-Paper HATblack, white161872×1404209.66 × 157.25216.7 × 174.4<1√√ USB/SPI/
I80
10.3inch e-Paper HAT (D)black, white161872×1404209.66 × 157.25227.7 × 165.8<1√√√USB/SPI/
I80
12.48inch e-Paper Moduleblack, white21304×984252.98 × 190.90280.0 × 229.5<8 √ SPI
12.48inch e-Paper Module (B)red, black, white21304×984252.98 × 190.90280.0 × 229.537 √ SPI
13.3inch e-Paper HATblack, white161600×1200270.40 × 202.80285.80 × 213.65<1√√ USB/SPI/
I80
13.3inch e-Paper HAT (K)black, white2960×680275.52 × 195.16286.32 × 212.265 √ SPI
  1. It usually takes about 0.3s for partial refresh
  2. Pi Header: standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards

e-Paper panels comparing



PACKAGE CONTENT


Weight: 0.014 kg

  1. 2.13inch e-Paper HAT x1
  2. RPi screws pack (2pcs) x1
  3. PH2.0 20cm 8Pin x1
1
2
3