FORD RANGER & MAZDA BT-50 3.2L
STEINBAUER MODULE
Before: 147kW | After: 176kW.
Before: 470NM | After: 564NM
Vehicle: Ford Ranger & Mazda BT-50 3.2L
new improved number 240048 will be supplied
20% more power & torque!
The Steinbauer Power Module delivers up to 20% more power when fitted to your diesel fuel passenger car, 4WD, Truck, Van or Machine.
How does it work?
The Steinbauer Power Module modifies the injection system by fine tuning the duration of the injectors. This is achieved by blue printing the original characteristics and intercepting the electronic signals from the ECU to the injection system. The fuel injection and engine speed are recorded and recalculated to optimise performance. Intelligent engine technology Increased power and torque, using fuel injection optimisation. Precision. Achieved. Steinbauer.
The desired performance enhancement is achieved by changing the injection duration, the same way the system was originally designed to operate. This also allows precise fuel control throughout the full rpm range of the engine. Injection duration is achieved by adding pulse width to a signal, (i.e. at end of injection). This is not changing timing—that’s best left to the factory ECU. Our module also does not interfere with common rail pressure - making our module the best choice for your engine.
So what is the benefit of all this Intelligent Technology for your vehicle?
Our module gives an additional 20% increase in power and torque, giving you greater towing power and making overtaking effortless and safer. Simply smarter. Simply safer. Simply Steinbauer.
| Installation - Simple cost-saving installation with original plug connectors | |
| Safety - Higher performance by optimising the fuel injection system | |
| Service - Standard service intervals remain unchanged | |
| Range of Products - Virtually all makes and models of vehicles and tractors catered for | |
| Steinbauer Warranty - A 3 year warranty on your Steinbauer Power Module | |
| Quality In-house development and testing |
*There is a Steinbauer module to suit almost every modern diesel vehicle or machine in production. Please contact us with your VIN to find the perfect Steinbauer for you.
This part must be fitted by a qualified diesel mechanic.
About Us
Hi Tech Diesel Injection was established in 1998 and employs 16 staff. Hi Tech Diesel Injection are specialists in offering repair, service and parts for diesel fuel injection and turbochargers. We are RAA approved and are warranty authorised dealers for Bosch, Zexel, Denso, Delphi and Stanadyne. We are also a Garrett authorised centre and achieved the Capricorn Million Dollar Supplier Award in 2012.
PRODUCTS AND SERVICES
Fuel Injection Pumps - Hi Tech Diesel Injection satisfy the rigorous standards of diesel fuel injection manufacturers such as Bosch, Denso and Delphi. Pressurised rooms are used to repair most common fuel injection products and a clean room has been installed for specialised repairs.
Injectors - servicing of injectors is our specialty, whether it is a single or dual spring application. All injectors are repaired using genuine parts set to manufacturers specifications.
Qualified Technicians - are factory trained by fuel injection manufacturers in the latest techniques to ensure that quality standards are achieved. This offers peace of mind knowing that experienced technicians are repairing your product.
Testing Facilities - utilise the latest computerised test benches to increase speed and accuracy to reduce down time and save you money
Exchange Products - Our exchange products are repaired to quality standards and are available for a large range and variety of vehicles both mechanical and common rail. All exchange products are covered by an impressive 12-month guarantee.
Diagnostic and Troubleshooting - including dyno and scan tools.
Shipping & Returns
Postage - Postal charges are clearly shown within the listing. If you bid, you are deemed to have accepted the shipping charges quoted. International shipping can be arranged. Please send us a message with your delivery address and we will quote the shipping costs to your destination.
Dispatch Times - We normally dispatch your order within 24 hours except on weekends and Public Holidays. Once your order has been sent you will receive eBay notification. Your goods will be shipped from South Australia, normally via Australia Post or TNT.
Returns - Please check goods for damage before signing delivery note as damage in transit can then be claimed on our courier insurance. All our parts are ID stamped before we send them. If a part is found to be not working correctly within 30 days*, the purchaser must return the part at the receivers expense to us for validation. We will refund purchase price or replace the part at our discretion.*30 day period starts from the date of goods being signed/delivered.
It is the buyer’s responsibility to ensure this item fits your specific application. Refunds will not be issued for incorrectly ordered parts or if you changed your mind. If in doubt, please supply a VIN and contact our parts department .
Terms & Conditions
Payment - All payments must be received via PayPal
Core Deposits - Core deposits will be fully refunded (subject to condition of returned unit assembled in a repairable state, drained and with the correct item number as listed above). All deposits will be refunded via PayPal to the account they were purchased from. If you cannot return your pump/injector within the 7 day core returns period it may result in the unit being rejected or only part of the deposit being refunded.
Exchange pump/injectors are sold on the basis they remain the property of Hi Tech Diesel Injection Pty Ltd. Cores due to be returned for refund cannot be sold or forfeited without the authorisation of the company.
Warranty - Parts are guaranteed free from defect for 12 months or 20,000 km (whichever comes first) from the date of invoice, unless detailed otherwise. This excludes damage arising from customer/third party interference, routine wear and tear, negligence, abuse and accidental damage. Our warranty extends only to the original purchaser of the product. Any damage arising from a third party installer is the sole responsibility of the original purchaser.
