Pro Signal  PSG03927 Turntable Stereo RIAA Phono Pre Amplifier

FEATURES:

• Amplifies signals from low current phono sources
• Designed for low noise with RIAA compensation
• High gain, low noise operation
• Inputs/Outputs: Phono (RCA) sockets
• Power on / off switch
• Requires PP3 9V battery (included)
• Metal case construction
• Dimensions (W x H x D): 60 x 29 x 86 mm
• Weight 172g
• Input Impedance- 50k ohms at 1kHz
• Output Impedance- 50k ohms
• Amplitude Gain- 34dB
• Rated Input Level- 3mV
• Maximum Permissible Input- 38mV
• Output Level- 1.8V RMS
• Frequency Response- 30Hz to 20kHz <Plus/Minus/>1dB
• Compensation- RIAA with deviation less than <Plus/Minus/>1dB
• Signal to Noise Ratio- 50dB with normal input
• Crosstalk- Better than 50dB
• Current Drain- 1mA average
• Colour: Black
• Impedance: 50kohm
• Signal to Noise Ratio: 50dB
• Supply Voltage V DC: 9V (PP3 battery - INCLUDED)

DESCRIPTION: The Pro Signal PSG03927 preamp is a battery powered turntable phono pre-amplifier that allows you to connect low signal output record players, turntables, magnetic cartridges etc to equipment that has normal stereo line level inputs eg most modern amplifiers. You can use this good quality RIAA equalised pre amp without signal loss or deterioration and avoid having to buy expensive new amplification equipment. Requires a PP3 9V battery which is included.

WHAT'S INCLUDED: 1 x Pro Signal Phono Preamplifier, PP3 9 volt battery, User guide, Troubleshooting Guide