VW Golf/Bora GTI Audi A3 Skoda Octavia VRS 1.8T 20VT 

OVERSIZED with 3" MAF

Turbo Silicone Air Intake Pipe

Engine Code AGU and ARZ

Description

H0003D

Exclusive new over sized silicone turbo intake pipe for that extra increased air flow.  This pipe is an absolute must on a remapped car.  We have seen significant gains on mapped cars with this over sized pipe.  This pipe has around 30% more capacity compared to the standard turbo intake pipe. 

Unlike the standard rubber OEM hoses which deteriorate over time and collapse when under pressure, our hoses are constructed using a high quality silicone Polyester or Nomex compound. They are further reinforced with a polyester layer to provide a more rigid structure to prevent collapse of hose under high boost conditions whilst sustaining pressure which is essential for the smooth delivery of power and quicker turbo spool resulting in increased performance and improved throttle response.

Models covered

VW GOLF/BORA IV - Audi A3/TT 1.8T - Seat Leon 1.8T- Skoda VRS engine codes AGU AND ARZ 

PLEASE NOTE: Due to this hose being oversized and the limited space available for fitting, you will find an obstruction caused by a metal coolant pipe which runs close to the turbo intake pipe,  you would be required to unbolt the metal coolant pipe from its mounting bracket and move slightly away from the engine to accommodate the oversized hose.  Professional installation is recommended. 

THIS PIPE WILL FIT THE STANDARD K03 and K03S Turbos with a 45mm inlet, and a 3" (80mm) MAF end fitting.

Please note that this item will fit the above cars and also please note that on some very very early AUM engine cars you might need a blanking plug to one of the small breather holes as some earlier cars did not have the breather at the bottom can be blanked off easily enough with a jubilee clamp and a blank piece of metal/bolt/blanking plug etc.  Please note this is the case with all 1.8T turbo intake pipes and most of the people selling them don't even mention it as they probably haven't seen a 1.8T engine.  Unlike us we are enthusiasts who make sure that all relevant information is provided so that there are no hidden surprises.  Please see our other auctions if you need a blanking plug.

Please check the quality on the pictures and compare them to any other hose on the market today you will not be disappointing we have sold many of these to enthusiasts all over the VW/Audi forums and also at all major events like GTI international.

Quality guarantee

Please note NEXT DAY DELIVERY  is only Available for items purchased!!!

 before 2 pm 

( Excluding Bank holidays and weekends)

We don't sell cheap quality items we sell quality items cheaper.....

Please note that when purchasing this item dont forget to include which colour hose you require.