This OBD2 Plug interface deactivates ECO-start-stop function at at MY2020 cars. After deactivation ECO start-stop will remember last selected mode. In case you left car with ECO OFF - it will stay OFF after you will start engine next time, untill you turn it ON again via ECO button

Tested to work with USA, Canada, Australian, European and Japan version of Mercedeses

  Our interface is an OBD2 pluig, no retrofit necessary - see picture. Only plug to diagnostics OBD2 port and wait messages on a COMAND display, after message "ECO if OFF" just remove module till you need it next time to turn VIM OFF or ON

Item will be shipped same day in case you provide the VIN number before order 

Mercedes Eco Start-stop OFF remove disable - YouTube

Video will open in a new window

[isdntekvideo]

Compatibility with vehicles

This interface will work for the following Mercedes COMAND radio/navigation system:

• E/S/GLE/A/CLA MY2019+
  

Function

OPERATION MANUAL NON MBUX CARS (ONE-FUNCTION MODULE):

• turn your ignition (ACC position 2) On but DO NOT START THE MOTOR
• wait minimum 60 seconds till audio head unit totally booted
• plug module to the diagnostic socket under the dash (also called OBD2)
• observe your audio head unit screen for messages
• you will see "waiting..." message about 20 seconds
• then you will see HWID: xxxxxxx - your audio head unit serial number
• then you see message "Succesful, xxxxxxxxx"
• Audio20 will be rebooted - means activation finished
• remove module from diagnostis socket

OPERATION MANUAL (2 or more functions with one module):

•  
• turn ignition on (ACC position 2) but DO NOT START THE MOTOR!!!
• wait till audio head unit will be totally booted (60 seconds)
• switch audio unit to the radio mode (press RADIO button)
• plug module to OBD2 disgnostic socket
• you will see "unlock more features" or other message
• 
  
• here you need to select the function you need to apply:
• 1> or 2> .... 5> or whatever activated
• 
  
• to select function please use:
• 
  
•       at the cars with NO COMAND numeric buttons - use controller rotation left and right and confirm with pressing controller down
• 
  
• at the car with COMAND head unit numeric buttons - use << or >> COMAND buttons and confirm with * (star) button or at NTG4.5 hear unit with COMAND ON button
• 
  
• rotate controller till you see the function you'd like to activate (for example 1> VIM for HU5s2)
• confirm with pressing controller knob down or * button at COMAND
• you will see :HWID.... and other messages that means activation started
• then you see the message "Successful, xxxxxxxx" = activation finished
• remove module
•  test your function

To turn ECO start-stop to factory settings you have to plug module one more time - and it will revert your car to the factory state. You can do On/OFF as many times as you need

Important: module will work only at the car where it was used first. Not possible to activate different car when it was used even ones

Shipping Policy

We ship international via standard post. In case, that you prefer expedited or first class shipping - please feel free to contact us before you pay.

Purchased product will be shipped to buyer's eBay address. If you need item to be shipped to the different address - please contact seller before you pay, please make sure your address in eBay matches the address you would like us to ship to. We will do our best to ship item as soon as possible.

In most cases, international shipping takes around 7-14 business days. Sometimes international delivery is highly depended on the local customs and post service. If you do not receive your item on time, please contact us immediately for further assistance.    

Returns Policy