·
Packungsinhalt /Package contents:
Deutsch:
Dieses Angebot enthält:
1 Stück Nema23
23HS2430B Schrittmotor
1
Stück Schrittmotortreiber DM542
1
Stück Schaltnetzteil S-350-36 (350W 36V) Netzteil
1 Stück Breakout Board & Kable DB25
English: This item includes:
1PC Nema23 Stepper Motor 23HS2430B
1PC Stepper Motor Driver DM542
1PC Power Supply 350W 36V
1PC Breakout Board&Cable
Schrittwinkel |
Step Angle |
1,8 ± 5% °/
Step |
Spannung |
Rated Voltage |
4,80 V |
Nennstrom |
Rated Current |
3,00 A /Phase |
Widerstand pro Phase |
Phase Resistance |
1,60 ± 10% ohm/Phase |
Induktanz pro Phase |
Phase inductance |
6,80 ± 20% mH/Phase |
Drehmoment |
Holding Torque |
280 N.cm Min ≈ 425 oz-in |
Rastmoment |
Detent Torque |
12 N.cm Max |
Drehmoment |
Rotor Torque |
800 g- cm² |
Anzahl der Drahtleitungen |
Number of Wires |
4 |
Wellendurchmesser |
Shaft Diameter |
Front shaft
diameter:Φ8,00 ± 0,012 mm Rear shaft
diameter: Φ6,35 ± 0,012 mm |
Motorlänge |
Motor Length |
112 mm |
Gewicht |
Motor Weight |
1,70 kg |
Leitungsverbindung |
Wires Connection |
EN: Black A+ , Green A- , Red B+ , Blue B- DE: Schwarz A +, Grün A- , Rot B + , Blau B- |
Specification/ Spezifikation:
Input Voltage/ Eingangsspannung |
18-50V
DC, 36 V
(typisch) |
Microstep
Setting/ Unterteilungsbereich |
400-25600ppr |
Output
Current/ Ausgangsstrom |
1.0A-4.2A |
Input Pulse Frequency/ Impulsantwort
Frequenz |
200 kHz (.) |
Insulation Resistance / Isolationswiderstand |
≥500MΩ |
Storage
Environment |
-40 ℃
- +70 ℃ |
Humidity |
Not
condensation, no water droplets |
Weight |
200g |
Using
Environment |
-10 ℃–
45 ℃, avoid
dust and corrosive gas |
Characters/ Eigenschaften:
· Average current control, 2-phase sinusoidal output current drive
· 8 channels output phase current setting
· Offline command input terminal
· High start speed
· High holding torque under high speed
· High performance, low price
· Opto-isolated signal I/O
· Overvoltage, under voltage, overcorrect, phase short circuit protection
· 15 channels subdivision and automatic idle-current reduction
· Motor torque is related with speed, but not related with step/revolution
Detailed
information
Spannung |
DC Voltage |
36V |
Spannungstoleranz |
Voltage
Tolerance |
+/-1% |
Nennstrom |
Rated
Current |
10 A |
Strombereich |
Current Range |
0-10A |
Spannungsspannung |
Ripple
&Noise |
(Max):
240mVp-p |
Line
Regulation |
Line
Regulation |
+/- 0,5% |
Load
Regulation |
Load
Regulation |
+/- 0,5% |
Nennleistung |
Rated Power |
350 W |
Nennleistung |
Rated Powe |
83% |
Wechselstrom |
AC Current |
6,5A/115VAC
4,0A/230VAC |
Anlaufzeit |
Setup Rise,
Hold Time |
200ms, 100ms,
20ms |
Vibration |
Vibration |
0-500Hz, 2G 10min/11 Zyklus, 60min, je Achse |
Stehspannung
I/P-O/P |
Withstand
Voltage I/P-O/P |
3KVACI/P-FG:
1.5KVACI/P-FG:0.5KVAC |
Isolationswiderstand |
Isolated
Resitor |
I/P-O/P,
I/P-FG:500VDC/100M W |
Arbeitstemperatur
/ Feuchtigkeit |
Working Temp.
Humidity |
-20°C -
+85°C, 10%-95%RH |
Abmessung |
Dimension |
215mmx115mmx50mm |
Gewicht |
Weight |
0,9kg |
Sicherheitsstandart |
Saftey
Standart |
UL1950 |
EMC |
EMC |
FCCpart1.5J
class A |
Connection | Connect 6 Drivers, control 6 Motors at the same time |
DB25 Output Pin | P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17 |
DB25 Input Pin | P10,P11,P12,P13,P15 |
DB25 GND Pin | P18 - P25 |
P2 = | X axis Pulse |
P3 = | X axis Direction |
P4 = | Y axis Pulse |
P5 = | Y axis Direction |
P6 = | Z axis Pulse |
P7 = | Z axis Direction |
P8 = | A axis Pulse |
P9 = | A axis Direction |
P14 = | B axis Pulse |
P1 = | B axis Direction |
P16 = | C axis Pulse |
P17= | C axis Direction |
Input pin: P10 ,P11, P12, P13, P15 | Set them for Emergency Stop and X Y Z Limit switch |
· Other information
Currently we are looking for qualified distributors in EU with competitive price and good discount in EU for mutually beneficial long-term relationship. We try our best to support our distributors and business partners to develop more
· OEM Service:
Deutsch: Wir können unsere Produkte auf Kundenwunsch anfertigen: Motorlänge, Kabellänge, Wellenmodus, Anschlussdrähte, etc.
English: We could manufacture products according to customer's requirement: Motor Length, Cable Length, Shaft Mode, Lead Wire Mode, and so on.
· Detaillierte Informationen / Detailed Information
Deutsch: Sollten Sie weitere Bilder oder Beschreibungen benötigen, kontaktieren Sie mich bitte!
English: If you need more pictures, descriptions, manual, please contact me!
· Zalung/Payment
Deutsch:
- Wir akzeptieren nur die Zahlung per Paypal.
- Die Artikel ist innerhalb von 4 Tagen zu bezahlen, anderfalls werden Sie einen Fall von eBay wegen nicht bezahlter Artikel erhalten.
- Bitte beachten Sie:
a)Alle weiteren möglichen Einfuhrzölle, Steuern und andere Gebühren sind nicht im Artikelpreis oder in den Versandkosten enthalten. Diese Gebühren sind die Verantwortlichkeit der Käufer.
b)Bitte bestätigen Sie mit Ihrer ländischen Zoll vor dem Kauf, wieviel diese Kosten betragen.
- Alle Preise verstehen sich inkl 19% Mehrwertsteuer!
English:
- We only accept payment via Paypal.
- The item is payable within 4 days, otherwise you will receive a case from eBay for unpaid items.
- Please note:
a) All other possible import duties, taxes and other charges are not included in the item price or shipping charges. These charges are the responsibility of the buyer.
b) Please confirm with your customs before buying how much these costs are.
- All prices include 19% VAT!
· Versand
Deutsch:
- Bitte beachten Sie die Versandmethoden und Versandkosten.
- Bei jeglichen Fragen zum Produkt oder zum Versand, kontaktieren Sie uns bitte.
- Versand via UPS und DHL Standard Service
- Alle gezeigten Produkte sind verfügbar und können sofort verschickt werden.
- Der Käufer trägt bei Bestellungen ins EU-Ausland (z.B Schweiz, Norwegen ect.) die Kosten für Zoll, Einfuhr und ggf. Steuer (Frankatur DDU)
English:
- Please check the shipping methods and shipping costs.
- If there are any questions according to the product or shipping, please contact us.
- All products are available and can be shipped out right after payment.
- Shipping via UPS und DHL Standard Service
- The buyer has to pay the cots of custom clearance, import and possibly taxes if the order has to be shipped to a non EU-country (e.g. Switzerland, Norway...) (franking DDU)
· Probleme / Rückmeldungen
Deutsch:
- Bitte kontaktieren Sie uns also, bevor Sie eine negative Bewertung hinterlassen.
- Bitte geben Sie uns die Möglichkeit, eventuelle Probleme die Sie mit unseren Produkten oder dem Versand haben zu lösen.
English:
- Please contact us before leaving a negative rating
- Please give us the opportunity to solve any problems you may have with our products or shipping.