MONTRÉAL SPA DEPOT

Welcomes you !

Please visit my boutique for all Gecko Electronics, Balboa WG®, Waterway & Aqua-Flo pumps Original® OEM warranty products needs for your spa, hot tub or bath tube

http://stores.cafr.ebay.ca/montrealspadepot

 

This Ebay item is for

Tecmark pressure switch model 3902, ID 14-103

one of the most uses in spa industry

1/8" MPT male-part threads plastic connection

Will not oxidize or rust. It is perfect for salt water & high moisture areas.

1 to 5 P.S.I. adjustable pressure detection

Spade/forks terminals connections & #8 screws

Works on all Gecko's / SpaBuilders SSPA / MSPA / TSPA / U-Class / S-Class / M-Class

Balboa instruments prior to M7 system, all pressure switch technology spa packs

And all others brands using pressure switch device for heater protection (Len Gordon, Tridelta, etc...)

-------------------------------------

Manufacturer product presentation

Series 3900 Pressure Switch Specifications

Series 3900 Pressure Switch

Series 3900 pressure switches are widely used in pilot duty applications and incorporate field adjustable set points and internal switch contacts. These switches convert a pressure signal to an electrical output. In response to a change in pressure, movement of an elastomeric diaphragm opens or closes an electrical circuit based on a predetermined pressure set point. The Series 3900 feature a compact size and a cost effective, combination terminal design which allows electrical connection with either 1/4" quick connect or #8 screw terminals. Pressure ranges as low as 6" Water Column (W.C.)* up to 5 PSI are available (1.5 kPa to 34.5 kPa). Series 3900 switches assure control stability through wide temperature and humidity conditions. As with all Tecmark® products, Series 3900 switches provide superior performance and uninterrupted service, even under extreme shock and vibration.

*27.7" water column = 1 PSI


Typical Applications

Commonly used as an interlock device to sense positive pressure in pneumatic or fluid flow systems. Series 3900 switches provide on/off control of a variety of electrical devices including gas, electric, electronic ignition and millivolt (standing pilot) heaters in fluid flow systems as well as other electrical equipment.


Basic Construction

  • Visual scale for adjusting pressure setting in the field
  • Elastomeric diaphragm eliminates the need for an oil barrier
  • Internal switch contacts
  • A combination terminal design offers both 1/4" quick connect and #8 screw terminals
  • Built in over pressure protection designed to eliminate stress on other critical operating components
  • UL Recognized, CSA certified, as an operating, limit or safety control.
  • SPST switching logic


 

Available Features

  • Pressure ranges as low as 6" WC up to 5 PSI (1.5 kPa to 34.5 kPa)
  • Factory calibration available upon request
  • A variety of mounting pan and pressure fitting materials; plated steel, stainless steel or injection molded plastic
  • Wide array of pressure fittings; 1/8" NPT male, 1/4" NPT male, 3/16" barbed, 1/8", 3/16" or 1/4" compression, or 1/8" NPT female with 1/2" conduit male external thread for mounting
  • Specialty diaphragm materials; Buna-N, EPDM, Hydrin
  • Models available with or without wiring enclosures


 

Ratings and Specifications

  • Maximum Operating Pressure and Hydrostatic burst pressure, varies based on model configurations. Consult factory for specific application needs.
  • ELECTRICAL Resistive rating: 15 amps @ 6 V.DC.
    • 8 amps @ 12 V.DC.
    • 4 amps @ 24 V.DC.
    • Inductive rating: 1 amp @ 120 VAC
    • Pilot Duty: 72 VA pilot duty @ 24 VAC
    • 120 VA pilot duty @ 120 VAC
    • 240 VA pilot duty @ 240 VAC
  • Field tested critical components specifically selected to operate reliably in temperature extremes of 32° to 190°F (0°C to 88°C)
  • 100,000+ cycle life under full mechanical, electrical and thermal loads

The Series 3900 switches are intended for pilot duty control of electrical contactors and relays. In applications where the pressure switch carries higher electrical loads, use our Series 3000 or Series 4000 pressure switches.

Design Flexibility

Tecmark's manufacturing philosophy is unique. In an effort to provide you with a product that is most suited to your application, Series 3900 switches incorporate numerous interchangeable components for the ultimate in design flexibility. This means a product tailored to your needs without the high price and long lead times associated with custom manufacturing. If you have a need and don't see the features you require, please ask us!

-------------------------------------------------------------------------------------------------

 

COMPLETE OEM ORIGINAL PRODUCT FROM TECMARK CORP. DIRECTLY.
Autorized dealer, Brand new objects.  Factory seal.
Come with 1 year of manufacturer warranty. see below for details
 

Minimum selling Retail price: 39.99$ + tx

Real cost shipping rates (insured 100%) with shipping calculator 9" x 7" x 4" inches.  Weight:  0.5 lb. 

CANADA:  by CanadaPost

  • Flat rate 9$ Expedited or Xpresspost 15$ 
     

USA:  CanadaPost&USPS 

  • Airmail small packet USA 6-12days no tracking#
  • Tracked packet USA 4-10 days, with tracking#

INTERNATIONAL: CanadaPost + your local Postal services 

  • International Airmail small packet 6-15 days, no tracking#
  • Tracked packet International - EMS - 4-15 days, with tracking#